Journal Articles
111
David Deisenroth, Michael M. Ohadi
“Thermal Management of High-Power Density Electric Motors for Electrification of Aviation and Beyond”
110
Martinus A. Arie, Amir H Shooshtari, Farah Singer, DM Hymas, Michael M. Ohadi
“An Additively manufactured novel polymer heat exchanger for dry cooling applications.”
109
Martinus A. Arie, Amir H. Shooshtari, Ratnesh Tiwari, Serguei V. Dessiatoun, Michael M. Ohadi, Joshua M. Pearce
“Experimental Characterization of Heat Transfer in an Additively Manufactured Polymer Heat Exchanger”, Applied Thermal Engineering, 113 (2017) 575-584
109
David M. Hymas, Martinus A. Arie, Farah Singer, Amir H. Shooshtari, and Michael M. Ohadi
“Enhanced Air-Side Heat Transfer In An Additively Manufactured Polymer Composite Heat Exchanger”
109
Martinus Adrian Arie, Amir Shooshtari, Michael Ohadi,
“Air Side Enhancement of Heat Transfer in an Additively Manufactured 1 kW Heat Exchanger for Dry Cooling Applications”
109
109
108
J. Darabi, M. M. Ohadi, S. V. Desiatoun
“Falling Film and Spray Evaporation Enhancement Using an Applied Electric Field”
107
Zhang, X., Keramati. H., Arie, M. A., Singer, F., Tiwari, R., Shooshtari, A., and Ohadi, M.,
“Recent Development in High Temperature Heat Exchangers: A Review”, Frontiers in Heat and Mass Transfer(FHMT), 2018, 11(18), pp. 1-14.
106
Arie, M. A., Shooshtari, A. H., and Ohadi, M. M.
“Experimental Characterization of An Additively Manufactured Heat Exchanger for Dry Cooling of Power Plants”, Applied Thermal Engineering, 129, pp. 187–198, 2018.
105
104
103
102
101
100
99
99
Raphael Mandel, Amir Shooshtari, Michael Ohadi (2017)
Thin-film evaporation on microgrooved heatsinks, Numerical Heat Transfer, Part A: Applications, DOI: 10.1080/10407782.2016.1257300
99
M. Mahadevan, S. Lee, S. V. Dessiatoun, M.M. Ohadi, E. Al Hajri, and K. Y. Choi,
“Heterogeneous Catalytic Polymerization of Ethylene in Micro Tubular Reactor Systems,” Chemical Engineering and Technology, Vol. 39, pp.293-300, 2016.
99
R. S. Andhare, A. Shooshtari, S. V. Dessiatoun, and M. M. Ohadi
“Heat Transfer and Pressure Drop Characteristics of a Flat Plate Manifold Microchannel Heat Exchanger in Counter Flow Configuration”; Applied Thermal Engineering, vol. 96, pp. 178-189, 2016.
99
M. A. Arie, A. H. Shooshtari, S. V. Dessiatoun, E. Al-Hajri, and M. M. Ohadi,
“Numerical Modeling and Thermal Optimization of a Single-phase Flow Manifold-microchannel Plate Heat Exchanger”; International Journal of Heat and Mass Transfer, vol. 81, pp. 478-489, 2015.
99
H. Ganapathy, S. Steinmayera, A.Shooshtari, S.V. Dessiatouna, M.M. Ohadi, and M.S. Alshehhi,
“Process Intensification Characteristics of a Microreactor Absorber for Enhanced CO2 Capture,” Applied Energy, Volume 162, 15 January 2016, pp. 416–427.
99
H. Ganapathy, A. Shooshtari, S. Dessiatoun, M.M. Ohadi, M. Alshehhi, 2015,
”Hydrodynamics and mass transfer performance of a microreactor for enhanced gas separation processes,” Chemical Engineering Journal, 266, pp. 258-270.
99
V. Jha, A. Shooshtari, E. Alhajri, and M.M. Ohadi, 2015
“Experimental Characterization of a Nickel-based Manifold Micro channel Evaporator,” Heat Transfer Engineering, Volume 36, Issue 1 (2015): pp. 33-42.
99
K. Choo, R. M. Galante, and M. M. Ohadi, 2014
“Energy consumption analysis of a medium-size primary data center in an academic campus,” Energy and Buildings 76 (2014) 414-421.
99
H. Ganapathy, A. Shooshtari, S. Dessiatoun, M. Alshehhi, and M.M. Ohadi.
“Fluid flow and mass transfer characteristics of enhanced CO2 capture in a minichannel reactor.” Applied Energy 119(2014): 43-56.
99
Ebrahim Al-Hajri, Amir H. Shooshtari, Serguei Dessiatoun, and Michael M. Ohadi,
“Performance characterization of R134a and R245fa in a high aspect ratio microchannel condenser.” International Journal of Refrigeration 36, no. 2(2013): 588-600.
99
H. Ganapathy, A, Shooshtari, K. Choo, S. Dessiatoun, M. Alshehhi, and M.M. Ohadi
“Volume of fluid based numerical modeling of condensation heat transfer and fluid flow characteristics in microchannels.” International Journal of Heat and Mass Transfer 65 (2013):62-72.
99
H. Ganapathy, E. Al-Hajri, M.M. Ohadi, 2013,
“Mass transfer characteristics of gas liquid absorption in a Taylor flow mini/microchannel reactors,” Chemical Engineering Science, 101, 69-80.
99
Dai. Jun, Das, Diganata, Ohadi, Michael M., and Michael Pecht, 2013,
“Reliability Risk Mitigation of Free Air Cooling through Prognostics and Health Management,” Journal of Applied Energy, Volume 111, November 2013, Pages 104–112.
99
Alshehhi, M., Shooshtari, A., Dessiatoun, S.V., and M.M. Ohadi, 2013,
“Parametric study on the separation of fine immiscible oil droplets from a gaseous stream using an electrostatic force,” HVAC&R Research, 19:5, 471-480.
99
Ganapathy, H., Al-Hajri, E. and Ohadi, M.M., 2013,
“Phase field modeling of Taylor flow in mini/micro channels, Part I: Bubble formation mechanisms and phase field parameters,” Chemical Engineering Science, 94, pp. 138-149.
99
Al-Hajri, E., Shooshtari, A. H., Dessiatoun, S., and Ohadi, M. M., (2012).
“Performance Characterization of R134a and R245fa in a High Aspect Ratio Microchannel.” Int. Journal of Refrigeration, 36(2), 588-600.
99
Vibhash Jha, Serguei Dessiatoun, Michael Ohadi, and Ebrahim Al Hajri,
“Experimental characterization of heat transfer and pressure drop inside a tubular evaporator utilizing advanced microgrooved surfaces,” ASME Journal of Thermal Sciences and Engineering Applications, Vol. 4, pp. 41009-1 to 41009-7, 2011.
99
Alshehhi, M., Shooshtari, A., Dessiatoun, S., Ohadi, M.M., and Goharzadeh, A.,
“Parametric Performance Analysis of an Electrostatic Wire-Cylinder Aerosol Separator in Laminar Flow Using a Numerical Modeling Approach”; Separation Science and Technology, 45, pp. 299-309, 2010.
99
M.D. Islam, M.M. Ohadi, and I. Kubo, (2010)
“Measurement of Solar-Energy (Direct Beam Radiation) in Abu Dhabi, UAE,” Renewable Energy 35 (2010) 515–519.
99
M.D. Islam, M. Al-Shehi, M. Ohadi, (2009),
“Emerging applications in Cryogenics- Nitrogen injection for Reservoir Enhanced Oil Recovery,” ASHRAE Transactions paper, also presented at the ASHRAE Annual meeting in Louisville, KY, June 20-24, 2009.
99
Foroughi, P., Shooshtari, A., Dessiatoun, S., Ohadi, M. (2009).
Experimental Characterization of an Electrohydrodynamic Micropump for Cryogenic Spot Cooling Applications. Heat Transfer Engineering, 31 (2).
99
Islam, M.D., I. Kubo, M.M. Ohadi, and A. Alalili, (2009),
“Measurement of solar energy radiation in Abu Dhabi, UAE,” Applied Energy 86 (2009) 511–515.
99
Rada, M., Shooshtari, A., & Ohadi, M. M. (2008).
Experimental and numeral simulation of meso-pumping of liquid nitrogen—Application to cryogenic spot cooling of sensors and detectors. Sensors & Actuators: A. Physical, 148 (1), 271-279.
99
Baummer T., Cetegen E., Ohadi M., Dessiatoun S., 2008,
“Force-fed evaporation and condensation utilizing advanced micro-structured surfaces and micro-channels,” Journal of Microelectronics, Vol 39, Issue 7, pp. 975-980.
99
Bar-Cohen, A., Arik, M. M., Ohadi, M., 2006,
“Direct Liquid Cooling of High Flux Micro and Nano Electronic Components,” IEEE Proceedings, August 2006, Vol 94, No. 8, pp1549-1570.
99
Tudor V., Ohadi M., 2006
“The Effect of Stationary and Sweeping Frequency AC Electric Fields on Frost Crystal Growth on a Cold Plate,” Elsevier’s International Journal of Refrigeration, Volume 29, Issue 4, pp. 669 – 677.
99
Moghadam, S., Kiger, K, and M. Ohadi, 2006,
“Measurement of Corona Wind Velocity and Calculation of Energy Conversion Efficiency for Air Side Heat Transfer Enhancement in Compact Heat Exchangers,” HVAC & R Journal, Vol 12, No. 1, pp. 57-68, Jan. 2006.
99
Tudor V., Ohadi M., 2005,
“Advances in Control of Frost on Evaporator Coils with an Applied Electric Field,” the International Journal of Heat and Mass Transfer, vol. 48, 21-22, 2005, pp. 4428-4434.
99
M. Ohadi, and J. Qi, 2005,
“Higher Energy Prices and the Research and Development Opportunities they present, “ Proceedings of the international Heat Pipes, Heat Pumps, and Refrigerators Conference, Invited Paper and Keynote speaker, PP. 233-245.
99
Ohadi, M.M., J. Qi, and J.L. Lawler, 2005,
“Ultra Thin Film Evaporation—Application to Emerging Technologies in Cooling of Micro Electronics,” in Microscale Heat Transfer-Fundamental and Applications, (Edits) S. Kakac, L.L. Vasiliev, Y.Bayazitoglu, and Y. Yener, Kluwer Academic Publishers, The Netherlands, 2005, pp.321-338.
99
Ohadi, M.M. and J. Qi, 2005,
“Thermal Management of Harsh Environment Electronics,” in Microscale Heat Transfer- Fundamental and Applications, (Edits) S. Kakac, L.L. Vasiliev, Y.Bayazitoglu, and Y. Yener, Kluwer Academic Publishers, The Netherlands, 2005, pp.479-498.
99
Kuang, G., Zhao, Y., and M. Ohadi, 2004,
“Experimental Study of Supercritical CO 2 Gas Cooling in a Microchannel Gas Cooler,” ASHRA Transactions, Vol. 1, Part 1, pp. 617-625.
99
Tudor, V., Ohadi, M.M., and Franca, F., 2003,
Effect of an applied electric field on ice crystal growth phenomena, HVAC & R Research Journal, Vol. 9, No. 2, pp. 203-213.
99
A.P. Rupani, M. Molki, M.M. Ohadi, and F.H. Franca, 2003,
“Enhanced Flow Boiling of R-134a in a Minichannel Plate Evaporator,” J. of Enhanced Heat Transfer, 10 (2003), 1-7.
99
Moghaddam, S., Rada, M., Shooshtari, A., Ohadi, M. and Joshi, Y.,
“Evaluation of Analytical Models for Thermal Analysis and Design of Electronic Packages,” Microelectronics Journal, 34 (2003) 223- 230.
99
Zhao, Y., Molki, M., Ohadi, M.M., Franca, F., and Radermacher, R., 2002,
“Flow Boiling of CO2 with Miscible Oil in Microchannels,” ASHRAE Transactions, Vol. 1, 2002
99
Ohadi, M.M., Buckley, S., 2001,
“High Temperature Heat Exchangers and Microscale Combustion Systems: Applications to Thermal System Miniaturization,” J. of Experimental Thermal and Fluid Science, 25 (2001) 207-217.
99
Darabi, J., Ohadi, M.M., and DeVoe, D., 2001,
“An Electrohydrodynamic Polarization Micropump for Electronic Cooling Applications,” Journal of Microelectromechanical Systems, 10, (1), 98-106.
99
Tang, L., Ohadi, M.M., and Johnson, A.T., 2000,
“Flow Condensation in Smooth and Micro-fin Tubes with HCFC-22, HFC-134a and HFC-410a Refrigerants Part II: Design Equations,” Journal of Enhanced Heat Transfer, Vol. 7, No. 5, pp. 311-325.
99
Tang, L., Ohadi, M.M., and Johnson, A.T., 2000,
“Flow Condensation in Smooth and Micro-fin Tubes with HCFC22, HFC134a and HFC-410a Refrigerants Part I: Experimental Results,” Journal of Enhanced Heat Transfer, Vol. 7, No. 5, pp. 289-310.
99
Molki, M., Ohadi, M. M., Baumgarten, B., Hasegawa, M., and Yabe, A., 2000,
“Heat Transfer Enhancement of Airflow in a Channel Using Corona Discharge,” Journal of Enhanced Heat Transfer, Vol. 7, No. 6, pp. 411-425.
99
Darabi, J., Ohadi, M.M., and Dessiatoun, S.V., 2000,
“Compound Augmentation of Pool Boiling on Three Selected Commercial Tubes,” Journal of Enhanced Heat Transfer, Vol. 7, pp. 347-360.
99
Darabi, J., Ohadi, M.M., and Dessiatoun, S. V., 2000,
“Falling Film and Spray Evaporation Using Electric Fields,” Journal of Heat Transfer, Vol. 122, No. 4, pp. 741-748.
99
Darabi, J., Ohadi, M.M., and Dessiatoun, S. V.,
“Augmentation of Thin Falling-Film Evaporation on Horizontal Tubes Using an Applied Electric Field” ASME Transactions, Journal of Heat Transfer, Vol. 122, No. 2, pp. 391-398.
99
Zhao, Y., Molki, M., Ohadi, M. M., and Dessiatoun, S. V., 2000,
“Flow Boiling Heat Transfer of CO2 in Micro Channels,” ASHRAE Transactions, Vol 1, Pt. 1, pp. 437-445.
99
D.A. Nelson, S. Zia, R.L. Whipple, and Ohadi, M.M., 2000,
“Corona Discharge Effects on Heat Transfer and Pressure Drop in Tube Flows,” Enhanced Heat Transfer Journal, Vol. 7, pp.81-95.
99
J. Darabi, M.M. Ohadi, M.A. Fanni, S.V. Dessiatoun, and Kedzierski, M.A., 1999,
“Effect of Heating Boundary Conditions on Pool Boiling Experiments,” HVAC&R Research, Vol. 5, No. 4, pp 283-296.
99
M.H. Saidi, M.M. Ohadi, M. Souhar, 1999,
“Enhanced Pool Boiling of R-123 Refrigerant on Two Selected Enh.anced Tubes,” J. of Applied Thermal Engineering v 19 n 8, pp. 885-895.
99
K. Cheung, M.M. Ohadi, S.V. Dessiatoun,
“EHD-Assisted External Condensation of R-134A on Smooth Horizontal and Vertical Tubes,” International Journal of Heat and Mass Transfer Vol. 42 No. 10 May 1999, pp. 1747-1755
99
Mo, B., M.M. Ohadi, and S.V. Dessiatoun,
“Analysis of the Startup Time Reduction and Thermal Performance Improvement in an EHD-Enhanced Capillary Pumped Loop,” Submitted to AIAA of Thermophysics and Heat Transfer, 1999.
99
Darabi, J., M.M. Ohadi, and S.V. Dessiatoun, 1999,
“EHD Enhancement of Thin Falling Film Evaporation,” ASME/JSME Joint Thermal Engineering Series, edited by T.W. Simon and M. Shoji, Volume 5, pp. 547-553.
99
Zhao, Y., Ohadi, M. M., Dessiatoun, S. V., Molki, M., and Darabi, J., 1999,
“Forced Convection Boiling Heat Transfer of CO 2 in Horizontal Tubes,” ASME/JSME Joint Thermal Engineering Series, edited by T.W. Simon and M. Shoji, Volume 2, pp. 358-364.
99
Darabi, J., M. M. Ohadi, and S. V. Dessiatoun, 1998,
“Heat Transfer Enhancement with Falling Film Evaporation on Vertical Tubes Using Electric Fields,” Innovative Concepts in Heat Exchangers, edited by K. Vafai, etc., ASME, Vol. 361-1, pp. 331-338.
99
Gidwani, A., Ohadi, M. M., and, Salehi, M., 1998,
“In-tube Condensation of Refrigerant and Refrigerant-Oil Mixtures-A Review of Most Recent Work,” ASHRAE Transactions, Vol. 104, Pt. 1B, pp. 1322-1332.
99
Hwang, Y, M. M. Ohadi, R. Radermacher, 1998,
“Natural Refrigerants,” Mechanical Engineering, Vol. 120, No. 10 (Oct 1998), ASME Fairfield, NJ, p 96-99.
99
Gidwani, A., Ohadi, M. M., and, Salehi, M., 1998,
“In-tube Condensation of Refrigerant and Refrigerant-Oil Mixtures-A Review of Most Recent Work,” ASHRAE Transactions, Vol. 104, Pt. 1B, pp. 1322-1332.
99
Hwang, Y, M. M. Ohadi, R. Radermacher, 1998,
“Natural Refrigerants,” Mechanical Engineering, Vol. 120, No. 10 (Oct 1998), ASME Fairfield, NJ, p 96-99.
99
Mo, B., M. M. Ohadi, S. V. Dessiatoun, and K. Cheung, 1999,
“Start-Up Time Reduction in an Electrohydrodynamically Enhanced Capillary Pumped Loop,” Journal of Thermophysics and Heat Transfer, Vol.13, No.1, pp.1-6.
99
Salehi, M., M.M. Ohadi and S. Dessiatoun,
“EHD-Enhanced Convective Boiling of R-134a in Grooved Channels — Application to Compact Heat Exchangers,” ASME Transactions, J. of Heat Transfer, Vol. 119, No. 4, pp. 805-809, 1997.
99
Cheung, J, M.M. Ohadi and S.V. Dessiatoun
“EHD-Enhanced Boiling Coefficients and Visualization of R-134a Over Enhanced Tubes”; ASME Transactions, J. of Heat Transfer, Vol. 119, No. 2, pp. 332-338, 1997.
99
Singh, A., M.M. Ohadi and S.V. Dessiatoun,
“EHD Enhancement of In-Tube Condensation Heat Transfer of Alternative Refrigerant R-134a in Smooth and Microfin Tubes,” ASHRAE Transactions, Vol. 103, part 1, pp. 813-823, 1997.
99
Mishra, S., A. Gidwani, M.M. Ohadi, and S.Dessiatoun,
“An Overview of Basic Models on Frost Formation Phenomenon and Recent Progress on the Use of an Applied Electric Field in Suppressing or Promoting Frost, “Heat Transfer, AICHE Symposium Series, Published by American Institute of Chemical Engineers, Vol. 93, pp. 197-210, 1997.
99
Singh, A., M.M. Ohadi and S. Dessiatoun,
“An Empirical Modeling of Stratified Wavy Flow Condensation Heat Transfer in Smooth Horizontal Tubes,” ASHRAE Transactions, Vol. 102, Part 2, pp. 596-603, 1996.
99
Ohadi, M.M., S.S. Li, S.V. Dessiatoun, and R. Radermacher,
“A Critical Review of Available Correlations for Two-Phase Flow Heat Transfer of Ammonia,” International J. of Refrigeration Vol. 19, No. 4, pp. 272-284, 1996.
99
Salehi, M., M.M. Ohadi and S.V. Dessiatoun,
“The Applicability of the EHD Technique for Convective Boiling of Refrigerant Blends–Experiments with R-404A,” ASHRAE Transactions, Vol. 102, Pt. 1, 1996.
99
Shih, T.M., and M.M. Ohadi,
“Literature Search on Recent Advances in Numerical Modeling in Heat and Mass Transfer,” Numerical Heat Transfer, Vol. 29, pp. 441-484, 1996.
99
Singh, A., M.M. Ohadi, and S.V. Dessiatoun,
“EHD-Enhanced Boiling of R-123 Over Commercially Available Enhanced Tubes,” ASME Transactions, J. of Heat Transfer, Vol.117, pp. 1070-1074, 1996.
99
Singh, A., M.M. Ohadi, and S.V. Dessiatoun,
“Flow Boiling Heat Transfer Coefficients of R-134a in a Micro-Fin Tube,” ASME Transactions, J. of Heat Transfer, Vol. 118, pp. 497-499, 1996.
99
Cheung, K., M.M. Ohadi, and S. Dessiatoun,
“Boiling Heat Transfer Enhancement of R-134a in a Tube Bundle Utilizing the EHD Technique,” J. of Enhanced Heat Transfer, Vol 3, No. 4, pp. 301-309, 1996.
99
Singh, A., M.M. Ohadi, S. Dessiatoun and W. Chu,
“In-Tube Boiling Heat Transfer Coefficients of R-123 and Their Enhancement Utilizing the EHD Technique,” J. Of Enhanced Heat Transfer, Vol. 2, No. 4, pp. 431-437, 1995.
99
Cheung, K.H., M.M. Ohadi, and S.V. Dessiatoun,
“Compound Enhancement of Boiling Heat Transfer of R-134a in a Tube Bundle,” ASHRAE Transactions, Vol. 101, part 1, pp. 1009-1019, 1995.
99
Darabi, J., M. Salehi, M.H. Saeedi, and M.M. Ohadi,
“Review of Available Correlations for Prediction of Flow Boiling Heat Transfer in Smooth and Augmented Tubes,” ASHRAE Transactions, Vol. 101, part 1, pp. 965-975, 1995.
99
Blanford, M.D., M.M. Ohadi, and S.V. Dessiatoun,
“Compound Air-Side Heat Transfer Enhancement in a Cross-Flow Refrigerant-to-Air Heat Exchanger,” ASHRAE Transactions, Vol. 101, Part 2, pp. 1049-1054, 1995.
99
Ohadi, M.M., S.S. LI and S. Dessiatoun,
“Electrostatic Heat Transfer Enhancement in a Tube Bundle Gas-to-Gas Heat Exchanger,” J. of Enhanced Heat Transfer, Vol. 1, No. 4, pp. 327-335, 1994.
99
Li, S.S., M.M. Ohadi, and S.V. Dessiatoun,
“Control of Heat Transfer Enhancement Rates in a Tube- Bundle Gas-to-Gas Heat Exchanger,” ASHRAE Transactions, Vol. 100, Part 1, pp. 631-638, 1994.
99
Ohadi, M.M., and K.L. Cheng,
“Mathematical Modeling of Temperature Distributions in the Workpiece During an Abrasive Waterjet Machining Process,” ASME Trans., Journal of Heat Transfer, Vol. 115, No. 2, pp. 446-452, 1993.
99
Papar, R.A., M.M. Ohadi, A. Kumar, and A.I. Ansari,
“Effect of Electrode Geometry on External Boiling of R-123/Oil Mixture,” ASHRAE Transactions, Vol. 99, Part I, pp. 1237-1243, 1993.
99
Ansari, A.I., M. Hashish, and M.M. Ohadi,
“Flow Visualization Study of the Macromechanics of Abrasive-Waterjet Turning,” SEM Transactions, Journal of Experimental Mechanics, Vol. 32, No. 4, pp. 358-362, 1992.
99
Ohadi, M.M., R. Papar, and M. Fanni-Tabrizi, R. Radermacher,
“Electrohydrodynamic Boiling Heat Transfer Enhancement of R-123 Outside of a Smooth Tube,” ASHRAE Transactions, Vol. 98, Pt. 2, pp. 427-434, 1992.
99
Ohadi, M.M., A.I. Ansari, and M. Hashish,
“Thermal Energy Distribution in the Workpiece During Cutting with an Abrasive Waterjet,” ASME Journal of Engineering for Industry, Vol. 114, No. 1, 1992.
99
Ohadi, M.M.,
“Electrohydrodynamic Enhancement of Single-Phase and Phase-Change Heat Transfer in Heat Exchanges,” ASHRAE Journal, Vol. 33, No. 12, pp. 42-48, 1991.
99
Ohadi, M.M., and R.L. Whipple,
“Measurement of Temperatures in a Tabular Workpiece During Cutting with an Abrasive Waterjet” SEM Transactions, Journal of Experimental Techniques, Vol. 15, No. 4, pp. 3842, 1991.
99
Ohadi, M.M., N. Sharaf, and D.A. Nelson,
“Electrohydrodynamic Enhancement of Heat Transfer in a Shelland-Tube Heat Exchanger,” Journal of Experimental Heat Transfer, Vol. 4, No. 1, pp. 1939, 1991.
99
Ohadi, M.M., D.A. Nelson, and S. Zia,
“Augmentation of Laminar and Turbulent Forced Convection Heat Transfer in Tubes Via Corona Discharge,” International Journal of Heat and Mass Transfer, Vol. 34, No. 4-5, pp. 1175-1187, 1991.
99
Ohadi, M.M., N. Sharaf, and D.A. Nelson,
“Electrohydrodynamic Enhancement of Heat Transfer in a Shelland-Tube Heat Exchanger” Journal of Experimental Heat Transfer, Vol. 4, No. 1, pp. 1939, 1991.
99
Ohadi, M.M., D.A. Nelson, and S. Zia,
“Augmentation of Laminar and Turbulent Forced Convection Heat Transfer in Tubes Via Corona Discharge,” International Journal of Heat and Mass Transfer, Vol. 34, No. 4-5, pp. 1175-1187, 1991.
99
Ohadi, M.M., and E.M. Sparrow,
“Effect of a 180 Bend on Heat Transfer in a Downstream Positioned Straight Tube,” International Journal of Heat and Mass Transfer, Vol. 33, No. 6, pp. 13591362, 1990.
99
Ohadi, M.M., E.M. Sparrow, A. Walavalkar, and A.I. Ansari,
“Pressure Drop Characteristics for Turbulent Flow in a Straight Tube Situated Downstream of a Bend,” International Journal of Heat and Mass Transfer, Vol. 33, No. 4, pp. 583591, 1990.
99
Nelson, D.A., M.M. Ohadi, S. Zia, and R.L. Whipple,
“Effect of Corona Discharge on Pressure Drop Characteristics for Forced Convection in Tubes,” International Journal of Heat and Fluid Flow, Vol. 11, No. 4, pp. 298-302, 1990.
99
Ohadi, M.M., J.R. Meyer, and K.M. Pollington,
“The Applicability and Limitations of a Simplified Building Energy Analysis Model- A Comparison Study,” ASHRAE Transactions, Vol. 95, Part I, pp. 1163-1173, 1989.
99
Ohadi, M.M., and E.M. Sparrow,
“Heat Transfer in a Straight Tube Situated Downstream of a Bend,” International Journal of Heat and Mass Transfer, Vol. 32, No. 2, pp. 201212, 1989.
99
Ohadi, M.M., J.R. Meyer, and C.F. Jacobs,
“Instructional Use of a Simplified Building Energy Analysis Model,” ASHRAE Transactions, Vol. 94, Part 2, pp. 15131528, 1988.
99
Sparrow, E.M., and M.M. Ohadi,
Comparison of Turbulent Thermal Entrance Regions for Pipe Flows with Developed Velocity and Velocity Developing From a SharpEdged Inlet,” Transactions of ASME, Journal of Heat Transfer, Vol. 109, pp. 10281030, 1987.
99
Sparrow, E.M., and M.M. Ohadi,
“Numerical and Experimental Studies of Turbulent Heat Transfer in a Tube,” Numerical Heat Transfer Journal, Vol. 11, No. 4, pp. 461476, 1987.