Peer-Reviewed Conference Proceedings
Martinus Adrian Arie, Amir Shooshtari, Michael Ohadi;
“Air Side Enhancement of Heat Transfer in an Additively Manufactured 1 kW Heat Exchanger for Dry Cooling Applications”
Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm), 2017 IEEE Intersociety Conference, May 29-June 2, 2017, Orlando, FL, USA
Daniel Bae, Raphael. Mandel, Serguei. Dessiatoun, Srihari Rajgopal, Samantha Roberts, Mehran Mehregany, M. Ohadi;
“Embedded Two-Phase Cooling of High Heat Flux Electronics on Silicon Carbide (SiC) using Thin Film Evaporation and Enhanced Delivery System (FEEDS) Manifold-Microchannel Cooler”
Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm), 2017 IEEE Intersociety Conference, May 29-June 2, 2017, Orlando, FL, USA.
Farah Singer, David Deisenroth, David Hymas, Michael Ohadi;
“Additively Manufactured Copper Components and Composite Structures for Thermal Management Applications,”
Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm), 2017 IEEE Intersociety Conference, May 29-June 2, 2017, Orlando, FL, USA.
David Deisenroth, Michael Ohadi, Avram Bar-Cohen;
”Two-phase Flow Regimes in a U-shaped Diabatic Manifolded-microgap Channel,”
Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm), 2017 IEEE Intersociety Conference, May 29-June 2, 2017, Orlando, FL, USA.
Kyosung Choo; Michael Ohadi, David Cooper;
“Simulation and Experimental Analysis of Data Centers in Academic Campus”
Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm), 2017 IEEE Intersociety Conference, May 29-June 2, 2017, Orlando, FL, USA.
David Hymas, Martinus Adrian Arie, Farah Singer, Amir Shooshtari, Michael Ohadi,
“Enhanced Air Side Heat Transfer in an Additively Manufactured Polymer Composite Heat
Exchanger“
Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm), 2017
IEEE Intersociety Conference, May 29-June 2, 2017, Orlando, FL, USA.
Fabio Battaglia, Farah Singer, Michael Ohadi;
“Comparison of Near Source Two-Phase
Flow Cooling of Power Electronics in Thermosiphon and Forced Convection Modes,”
Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm), 2017 IEEE Intersociety Conference, May 29-June 2, 2017, Orlando, FL, USA.
Sevket Umut Yuruker, Daniel Bae, Raphael Mandel, Bao Yang, Patrick McCluskey,
Avram Bar-Cohen, Michael Ohadi;
“Integration of Micro-contact Enhanced Thermoelectric
Cooler with a FEEDS Manifold-Microchannel System for Cooling of High Flux Electronics”
Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm), 2017 IEEE
Intersociety Conference, May 29-June 2, 2017, Orlando, FL, USA.
M. A. Arie, A. Shooshtari, S. Dessiatoun, and M. Ohadi,
“Performance Characterization
of an Additively Manufactured Titanium (Ti64) Heat Exchanger for an Air-water Cooling
Application,”
Proceedings of the ASME Heat Transfer, Fluids Engineering, & Nanochannels,
Microchannels, and Minichannels Conference, July 10-14, 2016, Washington, DC, USA.
M. A. Arie, A. Shooshtari, S. Dessiatoun, and M. Ohadi,
“Performance Characterization
of an Additively Manufactured Titanium (Ti64) Heat Exchanger for an Air-water Cooling
Application,”
Proceedings of the ASME Heat Transfer, Fluids Engineering, & Nanochannels,
Microchannels, and Minichannels Conference, July 10-14, 2016, Washington, DC, USA.
Mandel, R., Dessiatoun, S., McCluskey, P., and Ohadi, M.,
Embedded Two-Phase Cooling of High Flux Electronics via Micro-Enabled Surfaces and Fluid Delivery Systems (FEEDS),
Proc. ASME 2015 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems collocated with the ASME 2015 13th International Conference on Nanochannels, Microchannels, and Minichannels, American Society of Mechanical Engineers, pp. V003T010A012-V003T010A012.
G. Campbell, H. Eppich, K. Lang, C. Craemer, T. Yurovchak, K. Chu, A. Kassinos, M. Ohadi, A.
Shooshtari, S. Dessiatoun,
Advanced Cooling Designs for GaN-on-Diamond MMICs
ASME 2015 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems and ASME 2015 12th International Conference on Nanochannels, Microchannels, and Minichannels, InterPACKICNMM2015, San Francisco, California, USA.
D. C. Deisenroth, M. A. Arie, S. Dessiatoun, A. Shooshtari, M. Ohadi, and A. Bar-Cohen
Review of Most Recent Progress on Development of Polymer Heat Exchangers for Thermal Management Applications,"
ASME 2015 International Technical Conference and Exhibition on Packaging and
Integration of Electronic and Photonic Microsystems and ASME 2015 12th International
Conference on Nanochannels, Microchannels, and Minichannels, San Francisco, California, USA.
X. Zhang, M. A. Arie, D. C. Deisenroth, A. Shooshtari, S. Dessiatoun, and M. Ohadi, "
Impact of Additive Manufacturing on Performance Enhancement of Heat Exchangers: A Case Study on An Air-to-Air Heat Exchanger for High Temperature Applications,"
IX Minsk International Seminar on Heat Pipes, Heat Pumps, Refrigerators, Power Sources, Minsk, Belarus, 7-10 September, 2015.
Yang, N., Shooshtari, A., Dessiatoun, S. , Ohadi, M.,
Planar and Cylindrical Electrostatic Separators for Enhanced Separation of Fine Liquid Particles from High Velocity Air Stream,
Proceedings of the ASME 2014 International Mechanical Engineering Congress & Exposition IMECE2014, November 14-20, 2014, Montreal, Quebec, Canada.
Yang, N., Shooshtari, A., Dessiatoun, S. , Ohadi, M.,
Planar and Cylindrical Electrostatic Separators for Enhanced Separation of Fine Liquid Particles from High Velocity Air Stream,
Proceedings of the ASME 2014 International Mechanical Engineering Congress & Exposition IMECE2014, November 14-20, 2014, Montreal, Quebec, Canada.
Muthusubramanian, K. , Dessiatoun, S., Shooshtari, A., Ohadi, M.,
Velocity Based Defrost and Frost Inhibition of Evaporator Coils of Heat Pumps,
Proceedings of the ASME 2014 International Mechanical Engineering Congress & Exposition,IMECE2014, November 14-20, 2014, Montreal, Quebec, Canada.
Obadina, S., Fody, J., Dessiatoun, S., Ohadi, M., & Shooshtari, A.
Effect of Sand Fouling on Compact Fin Heat Exchangers,
The 15th International Heat Transfer Conference (IHTC-15), Kyoto, Japan, 2014.
Arie, M.A.; Shooshtari, A.; Dessiatoun, S.; Ohadi, M., "
Thermal optimization of an air-cooling heat exchanger utilizing manifold-microchannels,"
Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm), 2014 IEEE Intersociety Conference on , vol., no., pp.807,815, 27-30 May 2014.
H. Ganapathy, A. Shooshtari, S. Dessiatoun, M. Alshehhi , M. Ohadi.
“High efficiency carbon captures technology utilizing advanced micro-structured surfaces.”
In: Proceedings of the Carbon Management Technology Conference, 2013, Alexandria, Virginia.
Harish Ganapathy, Amir Shooshtari, Serguei Dessiatoun, Mohamed Alshehhi, and M. M.Ohadi.”
Experimental Investigation of Absorption of Carbon Dioxide in Diethanolamine In a
Microreactor.,”
International Conference on Nanochannels, Microchannels, and Minichannels
ICNMM2013, June 19, 2013.
H. Ganapathy, A. Shooshtari, S. Dessiatoun, M. Alshehhi, M. Ohadi.
“High efficiency carbon captures technology utilizing advanced micro-structured surfaces.”
In: Proceedings of the Carbon Management Technology Conference, 2013, Alexandria, Virginia.
Raphael Mandel, Amir Shooshtari, Serguei Dessiatoun, and M. Ohadi.
“Streamline Modeling of Manifold Microchannels in Thin Film Evaporation.”
In ASME 2013 Heat Transfer Summer Conference collocated with the ASME 2013 7th International Conference on Energy Sustainability and the ASME 2013 11th International Conference on Fuel Cell Science, Engineering and Technology, pp. V002T07A024-V002T07A024. American Society of Mechanical Engineers, 2013.
Harish Ganapathy, Amir Shooshtari, Serguei Dessiatoun, Mohamed Alshehhi and M. M.Ohadi.
"
Experimental Investigation of Enhanced Absorption of Carbon Dioxide in Diethanolamine in a
Microreactor."
In ASME 2013 11th International Conference on Nanochannels, Microchannels,
and Minichannels, pp. V001T03A013-V001T03A013. American Society of Mechanical Engineers, 2013.
David Boyea, Amir Shooshtari, Serguei V. Dessiatoun and Michael Ohadi.
“Heat Transfer and Pressure Drop Characteristics of a Liquid Cooled Manifold Microgroove Condenser.”
In ASME 2013 Heat Transfer Summer Conference collocated with the ASME 2013 7 th International Conference on Energy Sustainability and the ASME 2013 11 th International Conference of Fuel Cell Science, Engineering and Technology, pp. V003T23A003-V003T23A003. American Society of Mechanical Engineers, 2013.
Harish Ganapathy, Amir Shooshtari, Serguei Dessiatoun, Mohamed Alshehhi, and Michael M.
Ohadi. "
Experimental Investigation of Advanced Microscale Reactors for Enhanced Carbon
Capture and Natural Gas Sweetening Applications."
In ASME 2013 7th International Conference on Energy Sustainability collocated with the ASME 2013 Heat Transfer Summer Conference and the ASME 2013 11th International Conference on Fuel Cell Science, Engineering and Technology, pp. V001T05A008-V001T05A008. American Society of Mechanical Engineers, 2013.
Ganapathy, H, Shooshtari, A., Dessiatoun, S., Alshehhi, M, and Ohadi,M.M,
“Experimental Investigation of Advanced Microscale Reactors for Enhanced Carbon Capture and Natural Gas Sweetening Applications,”
75 th ASME National Heat Transfer Conference, Minneapolis, MN, July
14-19, 2013
Ganapathy, H., Shooshtari, A., Choo, K., Dessiatoun, S., Alshehhi, M., & Ohadi, M. M.
“Numerical Analysis of Condensation of R134a in a Single Microchannel.”
ASME 2012 International Mechanical Engineering Congress & Exposition IMECE2012. Houston, Texas, USA, November 9-15, 2012.
Arie, M. A., Shooshtari, A. H., Dessiatoun, S. V., Ohadi, M. M., & AlHajri, E. A.
Simulation and Thermal Optimization of A Manifold Microchannel Flat Plate Heat Exchanger.
ASME 2012 International Mechanical Engineering Congress & Exposition, November 9-15, 2012
Jun Dai, Michael Pecht, and Michael Ohadi,
“Achieving Greener and Lower Cost Data Centers through Prognostic Health Management (PHM),”
Published and presented as an invited paper at EGG 2012, September 9-12, 2012, Berlin, Germany.
H. Ganapathy, A. Shooshtari, K. Choo, S. Dessiatoun, M. Alshehhi, M.M. Ohadi, 2012,
Numerical analysis of condensation of R134a in a single microchannel,
International Mechanical Engineering Congress & Exposition, Houston, USA.
Dai, J., Das, D., Pecht, M., and M. M. Ohadi,
“A Case Study on Impact of Free Air Cooling on Performance of Telecom Equipment,”
SemiTherm Procecdings, March 18-22, 2012, San Jose, CA.
Ohadi, M.M., Dessiatoun, S.V., Choo, K., and M. Pecht,
“Air Vs. Liquid and Two-Phase Cooling of Data Centers,”
SemiTherm Proceedings, March 18-22, 2012, San Jose, CA
Acharya, B., Fody, J., Shooshtari, A., Dessiatoun, S., and Ohadi, M., 2011, "
Electrohydrodynamic (EHD) Enhanced Separation of Fine Liquid Droplets from Gas Flows,"
Proceedings of ASME International Mechanical Engineering Congress & Exposition, November 11-19, 2011, Denver, Colorado, USA.
Mandel, R.K.; Ohadi, M.M.; Shooshtari, A.; Dessiatoun, S.V., 2011, "
Thin film evaporation on microstructured surfaces
Application to cooling high heat flux electronics" Semi-Therm, 2011,
138 – 145.
Vibhash Jha, Serguei Dessiatoun, Michael Ohadi,”
Heat transfer and pressure drop characterization
of a tubular evaporator using manifold on the microgrooved surfaces, ITHERM 2012.
Jha, V., Ohadi, M., Dessiatoun, S., Shooshtari, A., and Al-Hajri, E., 2011, "
High performance micro- grooved evaporative heat transfer surface for low grade waste heat recovery applications,"
InterPACK July 4-7, 2011, Portland, Oregon.
Ganapathy, H., Al-Hajri, E. and Ohadi, M.M., 2011, "
Numerical simulation of mass transfer characteristics in a Taylor flow microreactor,”
In: Proceedings of ASME 9th International Conference on Nanochannels, Microchannels and Minichannels, June 19-22, 2011, Edmonton, Alberta, Canada.
Ganapathy, H., Al-Hajri, E. and Ohadi, M.M., 2011,
“Phase field method for simulation of multiphase flow,”
In: Proceedings of ASME International Mechanical Engineering Congress &
Exposition, November 11-19, 2011, Denver, Colorado, USA.
Al-Hajri, E. and Ohadi, M.M., 2011,
“Analysis of Taylor flow in microchannels by the phase field method,”
In: Proceedings of ASME International Mechanical Engineering Congress & Exposition,
November 11-19, 2011, Denver, Colorado, USA.
Ohadi, M.M., Kong, Xiangling, Ganapathy, H.,
“Applications of Micro and Nano Technologies in the Oil and Gas Industry- An Overview of the Recent Progress, “
Society of Petroleum Engineers (SPE) paper No. SPE-138241-PP, presented at the ADIPEC conference, Nov. 2010, Abu Dhabi, United Arab Emirates.
Kong, X., Alshehhi, M., Goharzadeh, A., Shooshtari, A., Dessiatoun, S., Ohadi, M.,
“Experimental Measurements of EHD Flow Pattern In an Electrostatic Air-Oil Separator by Particle Image Velocimetry”
ASME 2010 International Mechanical Engineering Congress & Exposition Vancouver, Canada November 12-18, 2010.
Mandel, R., Shooshtari, A., Ohadi, M., Dessiatoun, S.,
“Thin Film Evaporation on Microgrooved Surfaces—Application to Cooling High Heat Flux Electronics”
Semiconductor Thermal Measurement, Modeling and Management Symposium, San Jose, CA, USA, March 20-24, 2011.
Jha, V., Dessiatoun, S., Ohadi, M., Shooshtari, A., Al-Hajri, E.,
“High Performance Micro-Grooved Evaporative Heat Transfer surface for Low Grade Waste Heat Recovery Applications,”
ASME 2011 Pacific Rim Technical Conference & Exposition on Packaging and Integration of Electronic and Photonic Systems, InterPACK2011, July 6-8, 2011, Portland, Oregon.
M.D. Islam, M. Ohadi and A.E. Pillay,
“CO 2 capture and sequestration for emissions reduction and enhanced oil recovery applications,
in ASME-ATI-UIT 2010 Conference, 16- 19 May, 2010 Sorrento, Italy, pp.215-220.
M.D. Islam, M. Ohadi and A.E. Pillay,
“CO 2 capture and sequestration for emissions reduction and enhanced oil recovery applications,
in ASME-ATI-UIT 2010 Conference, 16- 19 May, 2010 Sorrento, Italy, pp.215-220.