Publications

2017

229.Integration, fabrication, and characterization of micro-contact enhanced TFTEC within a FEEDS cooler

Bae, D., Yuruker, S., Mandel, R. K., Barletta, P., Bar-Cohen, A., Bao, Y., McKluskey, P., and Ohadi, M.

Integration, fabrication, and characterization of micro-contact enhanced TFTEC within a FEEDS cooler, (Inpress)

CPMT 2017,2017.

(Abstract | Links | BibTeX)

228.Effect of bonding structure and heater design on performance enhancement of FEEDS Embedded manifold-microchannel cooling

Bae, D., Mandel, R., and Ohadi, M.

Effect of bonding structure and heater design on performance enhancement of FEEDS Embedded manifold-microchannel cooling, (Inpress)

InterPACK2017,2017.

(Abstract | Links | BibTeX)

227.Energy Analysis of a LEED Silver Certified Dining Hall on an Academic Campus—A Revisit Three Years after its Initial Certification

Bangerth, S., Ohadi, M. M., and Jenkins, C. A.

Energy Analysis of a LEED Silver Certified Dining Hall on an Academic Campus—A Revisit Three Years after its Initial Certification, (Journal Article)

ASHRAE Trans. LV-17-011, 123(1) ,2017.

(Abstract | Links | BibTeX)

226.Air Side Enhancement of Heat Transfer in an Additively Manufactured 1 kW Heat Exchanger for Dry Cooling Applications

Arie, M. A., Shooshtari, A. H., and Ohadi, M. M.

Air Side Enhancement of Heat Transfer in an Additively Manufactured 1 kW Heat Exchanger for Dry Cooling Applications, (Inpress)

Proc. 2017 16th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITHERM) ,2017.

(Abstract | Links | BibTeX)

225.Enhanced Air Side Heat Transfer in an Additively Manufactured Polymer Composite Heat Exchanger

David M. Hymas, Martinus A. Arie, Farah Singer, Amir Shoostair, Micheal Ohadi

Enhanced Air Side Heat Transfer in an Additively Manufactured Polymer Composite Heat Exchanger, (Inpress)

Proc. 2017 16th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITHERM) ,2017.

(Abstract | Links | BibTeX)

224. Comparison of Near Source Two-Phase Flow Cooling of Power Electronics in Thermosiphon and Forced Convection Modes

Battaglia, F. Singer, F., Ohadi, M.

Comparison of Near Source Two-Phase Flow Cooling of Power Electronics in Thermosiphon and Forced Convection Modes, (Inpress)

Proc. 2017 16th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITHERM) , 2017.

(Abstract | Links | BibTeX)

223.Review of heat exchangers enabled by polymer and polymer composite additive manufacturing

Deisenroth, D. C., Moradi, R., Shooshtari, A. H., Singer, F., Bar-Cohen, A., and Ohadi, M.

Review of heat exchangers enabled by polymer and polymer composite additive manufacturing, (Inpress)

Heat Transfer Engineering,2017.

(Abstract | Links | BibTeX)

222. Additively Manufactured Copper Components and Composite Structures for Thermal Management Applications

Singer, F., Deisenroth, D. C., Hymas, D., Dessiatoun, S., and Ohadi, M. M.

Additively Manufactured Copper Components and Composite Structures for Thermal Management Applications, (Inpress)

Proc. 2017 16th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITHERM) ,2017.

(Abstract | Links | BibTeX)

221. Two-phase flow regimes in a U-shaped diabatic manifolded-microgap channel

Deisenroth, D. C., Ohadi, M. M., and Bar-Cohen, A.

Two-phase flow regimes in a U-shaped diabatic manifolded-microgap channel, (Inpress)

Proc. 2017 16th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITHERM) ,2017.

(Abstract | Links | BibTeX)

220. Integration of Micro-Contact Enhanced Thermoelectric Cooler into a FEEDS Manifold-Microchannel System

Yuruker, S., Bae, D. G., Mandel, R. K., Bao, Y., Ohadi, M., Bar-Cohen, A., and McKluskey, P.

Integration of Micro-Contact Enhanced Thermoelectric Cooler into a FEEDS Manifold-Microchannel System, (Inpress)

Proc. 2017 16th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITHERM) ,2017.

(Abstract | Links | BibTeX)

219. Embedded Two-Phase Cooling of High-Heat Flux Electronics on Silicon Carbide (SiC) using Thin Film Evaporation and Enhanced Delivery System (FEEDS) Manifold-Microchannel Cooler

Bae, D. G., Mandel, R. K., Dessiatoun, S.V., Rajgopal, S., Roberts, S., Mehregany, M., and Ohadi, M.M.

Embedded Two-Phase Cooling of High-Heat Flux Electronics on Silicon Carbide (SiC) using Thin Film Evaporation and Enhanced Delivery System (FEEDS) Manifold-Microchannel Cooler, (Inpress)

Proc. 2017 16th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITHERM) ,2017.

(Abstract | Links | BibTeX)

218. Experimental Characterization of Heat Transfer in An Additively Manufactured Polymer Heat Exchanger

Arie, M. A., Shooshtari, A. H., Tiwari, R., Dessiatoun, S. V., and Ohadi, M. M.

Experimental Characterization of Heat Transfer in An Additively Manufactured Polymer Heat Exchanger, (Journal Article)

Applied Thermal Engineering, Vol. 113 , pp. 575-584, 2017.

(Abstract | Links | BibTeX)

2016

217.Performance Characterization of An Additively Manufactured Titanium (Ti64) Heat Exchanger for An Air-water Cooling Application

Arie, M. A., Shooshtari, A. H., Dessiatoun, S. V., and Ohadi, M. M.

Performance Characterization of An Additively Manufactured Titanium (Ti64) Heat Exchanger for An Air-water Cooling Application, (Inproceeding)

Proceedings of the ASME Heat Transfer, Fluids Engineering, and Nanochannels, Microchannels, and Minichannels Conference HT/FE/ICNMM2016, Washington, DC, USA. Vol. 2 , pp. V002T22A002, 2016, ISBN: 978-0-7918-5033-6.

(Abstract | Links | BibTeX)

216.Air-Side Heat Transfer Enhancement Utilizing Design Optimization and an Additive Manufacturing Technique

Arie, M. A., Shooshtari, A. H., Dessiatoun, S. V., and Ohadi, M. M.

Air-Side Heat Transfer Enhancement Utilizing Design Optimization and an Additive Manufacturing Technique, (Journal Article)

Journal of Heat Transfer Vol. 139(2) , pp. 031901, 2016.

(Abstract | Links | BibTeX)

215.Thermal performance of a polymer composite webbed-tube heat exchanger

Arie, M. A., Shooshtari, A. H., Dessiatoun, S. V., and Ohadi, M. M.

Thermal performance of a polymer composite webbed-tube heat exchanger, (Journal Article)

International Journal of Heat and Mass Transfer Vol. 98 , pp. 845-856, 2016.

(Abstract | Links | BibTeX)

214.Direct bonding of a titanium header to an embedded two-phase FEEDS cooling device for high-flux electronics

Deisenroth, D. C., Mandel, R. K., Greve, H., Dessiatoun, S. V., McCluskey, P., and Ohadi, M. M.

Direct bonding of a titanium header to an embedded two-phase FEEDS cooling device for high-flux electronics, (Inproceeding)

Proc. 2016 15th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITHERM) , pp. 1072-1077, 2016 ISSN: 978-1-4673-8121-5.

(Abstract | Links | BibTeX)

2015

213.Review of Most Recent Progress on Development of Polymer Heat Exchangers for Thermal Management Applications

Deisenroth, D. C., Arie, M. A., Dessiatoun, S., Shooshtari, A., Ohadi, M., and Bar-Cohen, A.

Review of Most Recent Progress on Development of Polymer Heat Exchangers for Thermal Management Applications (Inproceedings)

Proc. ASME 2015 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems (InterPACK), American Society of Mechanical Engineers ,Vol. 3 , pp. V003T003A003-V003T003A003, 2015,ISSN: 978-0-7918-5690-1.

(Abstract | Links | BibTeX)

212.Review of Most Recent Progress on Development of Polymer Heat Exchangers for Thermal Management Applications

Zhang, X., Arie, M. A., Deisenroth, D. C., Shooshtari, A. H., Dessiatoun, S. V., and Ohadi, M. M.

Impact of Additive Manufacturing on Performance Enhancement of Heat Exchangers: A Case Study on An Air-to-air Heat Exchanger for High Temperature Applications

IX Minsk International Seminar "Heat Pipes, Peat Pumps, Refrigerators, Power Sources", Minsk, Belarus ,Vol. 3 , pp. 141-153, 2015,ISSN: 978-0-7918-5690-1.

(Abstract | Links | BibTeX)

211.Hydrodynamics and mass transfer performance of a microreactor for enhanced gas separation processes

Ganapathy, H., Shooshtari, A., Dessiatoun, S., Ohadi, M. M., Alshehhi, M.

Hydrodynamics and mass transfer performance of a microreactor for enhanced gas separation processes (Journal Article)

Chemical Engineering Journal, 266 , pp. 258–270, 2015, ISSN: 1385-8947.

(Abstract | Links | BibTeX)

210.Numerical modeling and thermal optimization of a single-phase flow manifold-microchannel plate heat exchanger

Arie, M. A., Shooshtari, A. H., Dessiatoun, S. V., Al-Hajri, E., Ohadi, M. M.

Numerical modeling and thermal optimization of a single-phase flow manifold-microchannel plate heat exchanger (Journal Article)

International Journal of Heat and Mass Transfer, 81 , pp. 478–489, 2015.

(Abstract | Links | BibTeX)

2014

209.Study of CO2 Absorption Into Aqueous Diethanolamine (DEA) Using Microchannel Reactors

Bangerth, S., Ganapathy, H., Ohadi, M., Khan, T. S., and Alshehhi, M

Study of CO2 Absorption Into Aqueous Diethanolamine (DEA) Using Microchannel Reactors (Inprocedding)

Proceedings of the ASME 2014 International Mechanical Engineering Congress and Exposition, American Society of Mechanical Engineers,Montreal, Quebec, Canada, pp. V06AT07A010, 2014, ISBN: 978-0-7918-4951-4.

(Abstract | Links | BibTeX)

208.Alternative Energy Technologies— Current Status and Future Perspectives

Michael M. Ohadi, J. Qi, Harish Ganapathy

Alternative Energy Technologies— Current Status and Future Perspectives (Book Chapter)

Capehart, Barney; Anwar, Sohail (Ed.): CRC Press, Abingdon, Virginia, 2, 2014, ISBN: 849336538.

(BibTeX)

207.Experimental Characterization of a Nickel-Alloy Based Manifold-Microgroove Evaporator

Vibhash Jha, Sergeui V. Dessiatoun, Amir H. Shooshtari, Ebrahim S. Al-Hajri, Michael M. Ohadi

Experimental Characterization of a Nickel-Alloy Based Manifold-Microgroove Evaporator (Journal Article)

Heat Transfer Engineering, pp. 00-00, 2014, ISSN: 0145-7632 1521-0537.

(Abstract | Links | BibTeX)

206.Fluid Flow and Mass Transfer Characteristics of Enhanced Co2 Capture in a Minichannel Reactor

Harish Ganapathy, Amir H. Shooshtari, Sergeui V. Dessiatoun, M. Alshehhi, Michael M. Ohadi

Fluid Flow and Mass Transfer Characteristics of Enhanced Co2 Capture in a Minichannel Reactor (Journal Article)

Applied Energy, 119 , pp. 43-56, 2014.

(Abstract | Links | BibTeX)

205.Optimum Cooling of Data Centers: Application of Risk Assessment and Mitigation Techniques

Jun Dai, Michael M. Ohadi, Diganta Das, Michael G. Pecht

Optimum Cooling of Data Centers: Application of Risk Assessment and Mitigation Techniques (Book)

Springer, New York, 2014, ISBN: 978-1-4614-5601-8.

(Abstract | Links | BibTeX)

204.Energy Consumption Analysis of a Medium-Size Primary Data Center in an Academic Campus

K. Choo, R. M. Galante, Michael M. Ohadi

Energy Consumption Analysis of a Medium-Size Primary Data Center in an Academic Campus (Journal Article)

Energy and Buildings, 76 , pp. 414-421, 2014.

(Abstract | Links | BibTeX)

203.Thermal optimization of an air-cooling heat exchanger utilizing manifold-microchannels

Arie, Martinus Adrian, Shooshtari, Amir, Dessiatoun, Serguei, Ohadi, Michael

Thermal optimization of an air-cooling heat exchanger utilizing manifold-microchannels (Inproceeding)

Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm), 2014 IEEE Intersociety Conference on, pp. 807–815, IEEE, Orlando, FL, 2014.

(Abstract | Links | BibTeX)

2013

202.Performance Characterization of R134a and R245fa in a High Aspect Ratio Microchannel Condenser

E. Al-Hajri, Amir H. Shooshtari, Sergeui V. Dessiatoun, Michael M. Ohadi

Performance Characterization of R134a and R245fa in a High Aspect Ratio Microchannel Condenser (Journal Article)

International Journal of Refrigeration, 36 (2), pp. 588-600, 2013, ISSN: 0140-7007.

(Abstract | Links | BibTeX)

201.Heat Transfer

Michael M. Ohadi, R. Covilion, M. Shah

Heat Transfer (Book Chapter)

American Society of Heating, Refrigerating, and Air Conditioning Engineers, Atlanta, Georgia, 1993, 1997, 2001, 2005, 2009, 2013, 2013, ISBN: 1936504472.

(Abstract | Links | BibTeX)

200.Mass Transfer

Michael M. Ohadi, R. Covilion, M. Shah

Mass Transfer (Book Chapter)

American Society of Heating, Refrigerating, and Air Conditioning Engineers, Atlanta, Georgia, 1993, 1997, 2001, 2009, 2013, 2013, ISBN: 1936504472.

(Abstract | Links | BibTeX)

199.Streamline Modeling of Manifold Microchannels in Thin Film Evaporation

Raphael Mandel, Amir H. Shooshtari, Sergeui V. Dessiatoun, Michael M. Ohadi

Streamline Modeling of Manifold Microchannels in Thin Film Evaporation (Inproceeding)

pp. V002T07A024–V002T07A024, American Society of Mechanical Engineers, 2013, ISBN: 9780791855485.

(Abstract | BibTeX)

198.Enhanced Carbon Capture in a Multiport Microscale Absorber

Harish Ganapathy, Sascha Steinmayer, Amir H. Shooshtari, Sergeui V. Dessiatoun, Mohamed Alshehhi, Michael M. Ohadi

Enhanced Carbon Capture in a Multiport Microscale Absorber (Inproceeding)

pp. V06BT07A006-V06BT07A006, American Society of Mechanical Engineers, 2013, ISBN: 978-0-7918-5629-1.

(Abstract | Links | BibTeX)

197.High Efficiency Carbon Capture Technology Utilizing Advanced Micro-Structured Surfaces

Harish Ganapathy, Amir H. Shooshtari, Sergeui V. Dessiatoun, M. Alshehhi, Michael M. Ohadi

High Efficiency Carbon Capture Technology Utilizing Advanced Micro-Structured Surfaces (Inproceeding)

AiChE, Alexandria, VA, 2013.

(Abstract | Links | BibTeX)

196.Experimental Investigation of Enhanced Absorption of Carbon Dioxide in Diethanolamine in a Microreactor

Harish Ganapathy, Amir H. Shooshtari, Sergeui V. Dessiatoun, Mohamed Alshehhi, Michael M. Ohadi

Experimental Investigation of Enhanced Absorption of Carbon Dioxide in Diethanolamine in a Microreactor (Inproceeding)

ASME 2013 11th International Conference on Nanochannels, Microchannels, and Minichannels, pp. V001T03A013–V001T03A013, American Society of Mechanical Engineers, 2013, ISBN: 978-0-7918-5559-1.

(Abstract | BibTeX)

195.Experimental Investigation of Advanced Microscale Reactors for Enhanced Carbon Capture and Natural Gas Sweetening Applications

Harish Ganapathy, Amir H. Shooshtari, Sergeui V. Dessiatoun, Mohamed Alshehhi, Michael M. Ohadi

Experimental Investigation of Advanced Microscale Reactors for Enhanced Carbon Capture and Natural Gas Sweetening Applications (Inproceeding)

75th ASME National Heat Transfer Conference, pp. V001T05A008–V001T05A008, American Society of Mechanical Engineers, 2013, ISBN: 9780791855515.

(Abstract | Links | BibTeX)

194.Volume of Fluid-Based Numerical Modeling of Condensation Heat Transfer and Fluid Flow Characteristics in Microchannels

Harish Ganapathy, Amir H. Shooshtari, K. Choo, Sergeui V. Dessiatoun, M. Alshehhi, Michael M. Ohadi

Volume of Fluid-Based Numerical Modeling of Condensation Heat Transfer and Fluid Flow Characteristics in Microchannels (Journal Article)

International Journal of Heat and Mass Transfer, 65 , pp. 62-72, 2013.

(Abstract | Links | BibTeX)

193.Phase Field Modeling of Taylor Flow in Mini/Microchannels, Part Ii: Hydrodynamics of Taylor Flow

Harish Ganapathy, E. Al-Hajri, Michael M. Ohadi

Phase Field Modeling of Taylor Flow in Mini/Microchannels, Part Ii: Hydrodynamics of Taylor Flow (Journal Article)

Chemical Engineering Science, 94 , pp. 156-165, 2013, ISSN: 0009-2509.

(Abstract | Links | BibTeX)

192.Mass Transfer Characteristics of Gas-Liquid Absorption During Taylor Flow in Mini/Microchannel Reactors

Harish Ganapathy, E. Al-Hajri, Michael M. Ohadi

Mass Transfer Characteristics of Gas-Liquid Absorption During Taylor Flow in Mini/Microchannel Reactors (Journal Article)

Chemical Engineering Science, 101 , pp. 69-80, 2013, ISSN: 0009-2509.

(Abstract | Links | BibTeX)

191.Phase Field Modeling of Taylor Flow in Mini/Microchannels, Part I: Bubble Formation Mechanisms and Phase Field Parameters

Harish Ganapathy, E. Al-Hajri, Michael M. Ohadi

Phase Field Modeling of Taylor Flow in Mini/Microchannels, Part I: Bubble Formation Mechanisms and Phase Field Parameters (Journal Article)

Chemical Engineering Science, 94 , pp. 138-149, 2013, ISSN: 0009-2509.

(Abstract | Links | BibTeX)

190.Energy Efficiency and Reliability Risk Mitigation of Data Centers through Prognostics and Health Management

Jun Dai, Michael M. Ohadi, Michael G. Pecht

Energy Efficiency and Reliability Risk Mitigation of Data Centers through Prognostics and Health Management (Book Chapter)

Iyengar, Madhusudan; Geisler, Karl; Sammakia, Bahgat (Ed.): World Scientific, 2013, ISBN: 978-981-4579-78-0.

(Links | BibTeX)

189.Two-Phase Flow

R. Covilion, M. Shah, Michael M. Ohadi, Kyosung Choo

Two-Phase Flow (Book Chapter)

American Society of Heating, Refrigerating, and Air Conditioning Engineers, Atlanta, Georgia, 1993, 1997, 2013, 2013, ISBN: 1936504472.

(Abstract | Links | BibTeX)

188.Heat Transfer and Pressure Drop Characteristics of a Liquid Cooled Manifold-Microgroove Condenser

David Boyea, Amir H. Shooshtari, Sergeui V. Dessiatoun, Michael M. Ohadi

Heat Transfer and Pressure Drop Characteristics of a Liquid Cooled Manifold-Microgroove Condenser (Inproceeding)

pp. V003T23A003–V003T23A003, American Society of Mechanical Engineers, 2013.

(Abstract | BibTeX)

187.Parametric Study on the Separation of Fine Immiscible Oil Droplets from a Gaseous Stream Using an Electrostatic Force

M. Alshehhi, Amir H. Shooshtari, Sergeui V. Dessiatoun, Michael M. Ohadi

Parametric Study on the Separation of Fine Immiscible Oil Droplets from a Gaseous Stream Using an Electrostatic Force (Journal Article)

HVAC&R Research, 19 (5), pp. 471-480, 2013, ISSN: 1078-9669.

(Abstract | Links | BibTeX)

2012

186.Cooling of Next Generation Electronics for Diverse Applications

Amir H. Shooshtari, Raphael Mandel, Michael M. Ohadi

Cooling of Next Generation Electronics for Diverse Applications (Book Chapter)

Anwar, (Ed.): pp. 1-17 SE, Taylor and Francis, New York, 2012, ISBN: 0-8493-3653-8.

(Abstract | BibTeX)

185.Enhancement of Co 2 Absorption in Aqueous Diethanolamine Amine Using Microchannel Contactors

Amir H. Shooshtari, R. Kuzmicki, Sergeui V. Dessiatoun, M. Alshehhi, E. Al-Hajri, Michael M. Ohadi

Enhancement of Co 2 Absorption in Aqueous Diethanolamine Amine Using Microchannel Contactors (Inproceeding)

pp. 1057-1065, 2012, ISBN: 9781618396112.

(Abstract | Links | BibTeX)

184.A Comparison Analysis of Air, Liquid, and Two-Phase Cooling of Data Centers

Michael M. Ohadi, Sergeui V. Dessiatoun, K. Choo, M. Pecht, J. V. Lawler

A Comparison Analysis of Air, Liquid, and Two-Phase Cooling of Data Centers (Inproceeding)

2012 28th Annual IEEE Semiconductor Thermal Measurement and Management Symposium (SEMI-THERM), pp. 58-63, 2012, ISBN: 9781467311113, 10652221 (ISSN).

(Abstract | Links | BibTeX)

183.Next Generation Microchannel Heat Exchangers

Michael M. Ohadi, Kyosung Choo, Sergeui V. Dessiatoun, Edvin Cetegen

Next Generation Microchannel Heat Exchangers (Book)

Springer, New York, 2012, ISBN: 1461407796.

(Abstract | Links | BibTeX)

182.Method for Controlling Frost on a Heat Transfer Device

Paul Kalinowski, John Lawler, Seguei Dessiatoun, Amir H. Shooshtari

Method for Controlling Frost on a Heat Transfer Device ()

2012, (Assignee: Electric Power Research Institute, Inc., Application Num: US 13/463,254, Patent Num: US20120279238 A1).

(Abstract | Links | BibTeX)

181.Experimental Characterization of Heat Transfer and Pressure Drop inside a Tubular Evaporator Utilizing Advanced Microgrooved Surfaces

Vibhash Jha, Sergeui V. Dessiatoun, Michael M. Ohadi, Ebrahim Al Hajri

Experimental Characterization of Heat Transfer and Pressure Drop inside a Tubular Evaporator Utilizing Advanced Microgrooved Surfaces (Journal Article)

Journal of Thermal Science and Engineering Applications, 4 (4), pp. 41009, 2012, ISSN: 19485085.

(Abstract | Links | BibTeX)

180.Chapter 22 - Policies for Energy System Transformations: Objectives and Instruments

Mark Jaccard, Lawrence Agbenmabiese, Christian Azar, Adilson de Oliveira, Carolyn Fischer, Brian Fisher, Alison Hughes, Michael M. Ohadi, Yamaji Kenji, Xiliang Zhang

Chapter 22 - Policies for Energy System Transformations: Objectives and Instruments (Book Chapter)

Global Energy Assessment - toward a Sustainable Future, pp. 1549-1602, Cambridge University Press, Cambridge, UK and New York, NY, USA and the International Institute for Applied Systems Analysis, Laxenburg, Austria, 2012, ISBN: 9781 10700 5198 hardback 9780 52118 2935 paperback.

(Links | BibTeX)

179.Heat Transfer and Pressure Drop Characterization of a Tubular Evaporator Using Manifold on the Microgrooved Surfaces

V. Jha, Sergeui V. Dessiatoun, Michael M. Ohadi

Heat Transfer and Pressure Drop Characterization of a Tubular Evaporator Using Manifold on the Microgrooved Surfaces (Inproceeding)

2012 13th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm), pp. 732-739, 2012, ISBN: 9781424495320, 19363958 (ISSN).

(Abstract | Links | BibTeX)

178.Policies for Energy System Transformations

M. Jaccard, L. Agbemabiese, C. Azar, C. Fischer, B. Fisher, A. Hughes, Michael M. Ohadi, A. de Oliveira, Zhang X, K. Yamaji

Policies for Energy System Transformations (Book)

IIASA, Cambridge University Press, Cambridge, UK and New York, NY, USA and the International Institute for Applied Systems Analysis, Laxenburg, Austria, 2012, ISBN: 9781 10700 5198.

(Abstract | Links | BibTeX)

177.Numerical Analysis of Condensation of R134a in a Single Microchannel

Harish Ganapathy, Amir H. Shooshtari, Kyosung Choo, Sergeui V. Dessiatoun, Mohamed Alshehhi, Michael M. Ohadi

Numerical Analysis of Condensation of R134a in a Single Microchannel (Inproceeding)

ASME 2012 International Mechanical Engineering Congress and Exposition, pp. 2971-2980, ASME, Houston, Texas, 2012.

(Abstract | Links | BibTeX)

176.Achieving Greener and Lower Cost Data Centers through Phm

Jun Dai, M. Pecht, Michael M. Ohadi

Achieving Greener and Lower Cost Data Centers through Phm (Inproceeding)

Electronics Goes Green 2012+ (EGG), pp. 1-6, 2012.

(Abstract | BibTeX)

175.Simulation and Thermal Optimization of a Manifold Microchannel Flat Plate Heat Exchanger

M. A. Arie, Amir H. Shooshtari, Sergeui V. Dessiatoun, Michael M. Ohadi, E. Al Hajri

Simulation and Thermal Optimization of a Manifold Microchannel Flat Plate Heat Exchanger (Inproceeding)

ASME 2012 International Mechanical Engineering Congress and Exposition, pp. 209-220, American Society of Mechanical Engineers, Houston, Texas, 2012.

(Abstract | Links | BibTeX)

2011

174.Electrohydrodynamic (Ehd) Enhanced Separation of Fine Liquid Droplets from Gas Flows

B. Acharya, Sergeui V. Dessiatoun, Amir H. Shooshtari, J. Fody, Michael M. Ohadi

Electrohydrodynamic (Ehd) Enhanced Separation of Fine Liquid Droplets from Gas Flows (Inproceeding)

ASME 2011 International Mechanical Engineering Congress and Exposition, pp. 1447-1453, ASME, 2011, ISBN: 9780791854921.

(Abstract | Links | BibTeX)

173.Thin Film Evaporation on Microstructured Surfaces; Application to Cooling High Heat Flux Electronics

R. K. Mandel, Michael M. Ohadi, Amir H. Shooshtari, Sergeui V. Dessiatoun

Thin Film Evaporation on Microstructured Surfaces; Application to Cooling High Heat Flux Electronics (Inproceeding)

2011 27th Annual IEEE Semiconductor Thermal Measurement and Management Symposium (SEMI-THERM), pp. 138-145, 2011.

(Abstract | Links | BibTeX)

172.High Performance Micro-Grooved Evaporative Heat Transfer Surface for Low Grade Waste Heat Recovery Applications

Vibhash Jha, Sergeui V. Dessiatoun, Michael M. Ohadi, Amir H. Shooshtari, Ebrahim Al-Hajri

High Performance Micro-Grooved Evaporative Heat Transfer Surface for Low Grade Waste Heat Recovery Applications (Inproceeding)

ASME 2011 Pacific Rim Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Systems, pp. 277-283, ASME, Portland, Oregon, 2011.

(Abstract | Links | BibTeX)

171.Analysis of Taylor Flow in Microchannels by the Phase Field Method

Harish Ganapathy, Ebrahim Al-Hajri, Michael M. Ohadi

Analysis of Taylor Flow in Microchannels by the Phase Field Method (Inproceeding)

ASME 2011 International Mechanical Engineering Congress and Exposition, pp. 527-537, ASME, 2011.

(Abstract | Links | BibTeX)

170.Phase Field Method for Simulation of Multiphase Flow

Harish Ganapathy, Ebrahim Al-Hajri, Michael M. Ohadi

Phase Field Method for Simulation of Multiphase Flow (Inproceeding)

ASME 2011 International Mechanical Engineering Congress and Exposition, pp. 1309-1319, American Society of Mechanical Engineers, Denver, Colorado, 2011, ISBN: 978-0-7918-5492-1.

(Abstract | Links | BibTeX)

169.Numerical Simulation of Mass Transfer Characteristics in a Taylor Flow Microreactor

Harish Ganapathy, E. Al-Hajri, Michael M. Ohadi

Numerical Simulation of Mass Transfer Characteristics in a Taylor Flow Microreactor (Inproceeding)

ASME 2011 9th International Conference on Nanochannels, Microchannels, and Minichannels, pp. 685-695, ASME, Heat Transfer Division, Edmonton, Alberta, Canada, 2011, ISBN: 9780791844632.

(Abstract | Links | BibTeX)

2010

168.Experimental Characterization of Ehd Flow in an Electrostatic Air-Oil Droplets Separator Using Particle Image Velocimetry

Xiangling Kong, Mohamed Alshehhi, Afshin Goharzadeh, Amir H. Shooshtari, Sergeui V. Dessiatoun, Michael M. Ohadi

Experimental Characterization of Ehd Flow in an Electrostatic Air-Oil Droplets Separator Using Particle Image Velocimetry (Inproceeding)

ASME 2010 International Mechanical Engineering Congress and Exposition, pp. 927-933, ASME, Vancouver, British Columbia, 2010.

(Abstract | Links | BibTeX)

167.Applications of Micro and Nano Technologies in the Oil and Gas Industry-an Overview of the Recent Progress

X. Kong, Michael M. Ohadi

Applications of Micro and Nano Technologies in the Oil and Gas Industry-an Overview of the Recent Progress (Inproceeding)

14th Abu Dhabi International Petroleum Exhibition and Conference 2010, pp. 1703-1713, 2010, ISBN: 9781617820434.

(Abstract | Links | BibTeX)

166.Thermal Performance of an Air-Cooled Micro-Grooved Heat Sink

Paul Kalinowski, Edvin Cetegen, Sergeui V. Dessiatoun, John Lawler

Thermal Performance of an Air-Cooled Micro-Grooved Heat Sink (Inproceeding)

2010 14th International Heat Transfer Conference, pp. 741-752, ASME, 2010, ISBN: 978-0-7918-4938-5.

(Abstract | Links | BibTeX)

165.Measurement of Solar-Energy (Direct Beam Radiation) in Abu Dhabi, Uae

M. D. Islam, A. A. Alili, I. Kubo, Michael M. Ohadi

Measurement of Solar-Energy (Direct Beam Radiation) in Abu Dhabi, Uae (Journal Article)

Renewable Energy, 35 (2), pp. 515-519, 2010, ISSN: 0960-1481.

(Abstract | Links | BibTeX)

164.Experimental Characterization of an Electrohydrodynamic Micropump for Cryogenic Spot Cooling Applications

P. Foroughi, Amir H. Shooshtari, Sergeui V. Dessiatoun, Michael M. Ohadi

Experimental Characterization of an Electrohydrodynamic Micropump for Cryogenic Spot Cooling Applications (Journal Article)

Heat Transfer Engineering, 31 (2), pp. 119-126, 2010, ISSN: 0145-7632.

(Abstract | Links | BibTeX)

163.Parametric Performance Analysis of an Electrostatic Wire-Cylinder Aerosol Separator in Laminar Flow Using a Numerical Modeling Approach

M. Alshehhi, Amir H. Shooshtari, Sergeui V. Dessiatoun, Michael M. Ohadi, A. Goharzadeh

Parametric Performance Analysis of an Electrostatic Wire-Cylinder Aerosol Separator in Laminar Flow Using a Numerical Modeling Approach (Journal Article)

Separation Science and Technology, 45 (3), pp. 299-309, 2010, ISSN: 0149-6395.

(Abstract | Links | BibTeX)

2009

162.Experimental Investigation of Heat Transfer Performance of a Manifold Microchannel Heat Sink for Cooling of Concentrated Solar Cells

E. Kermani, Sergeui V. Dessiatoun, Amir H. Shooshtari, Michael M. Ohadi

Experimental Investigation of Heat Transfer Performance of a Manifold Microchannel Heat Sink for Cooling of Concentrated Solar Cells (Inproceeding)

Electronic Components and Technology Conference, 2009. ECTC 2009. 59th, pp. 453-459, 2009, ISBN: 9781424444762, 05695503 (ISSN).

(Abstract | Links | BibTeX)

161.Measurement of Solar Energy Radiation in Abu Dhabi, Uae

M. D. Islam, I. Kubo, Michael M. Ohadi, A. A. Alili

Measurement of Solar Energy Radiation in Abu Dhabi, Uae (Journal Article)

Applied Energy, 86 (4), pp. 511-515, 2009.

(Abstract | Links | BibTeX)

160.Emerging Applications in Cryogenics - Nitrogen Injection for Reservoir Enhanced Oil Recovery

Md D. Islam, M. Alshehhi, Michael M. Ohadi

Emerging Applications in Cryogenics - Nitrogen Injection for Reservoir Enhanced Oil Recovery (Inproceeding)

2009 ASHRAE Annual Conference, pp. 959-965, 2009, ISBN: 12505.

(Abstract | Links | BibTeX)

159.Multi Objective Optimization of a Force Fed Microchannel Heat Sink

Edvin Cetegen, Sergeui V. Dessiatoun, Michael M. Ohadi

Multi Objective Optimization of a Force Fed Microchannel Heat Sink (Inproceeding)

ASME 2009 Second International Conference on Micro/Nanoscale Heat and Mass Transfer, pp. 93-100, ASME, Shanghai, China, 2009, ISBN: 978-0-7918-4391-8.

(Abstract | Links | BibTeX)

2008

158.Electrohydrodynamic (Ehd)-Enhanced Separation of Fine Liquid Droplets from Gas Flows-Application to Refrigeration and Petro-Chemical Processes

M. Al Shehhi, Sergeui V. Dessiatoun, Amir H. Shooshtari, Michael M. Ohadi, A. Goharzadeh

Electrohydrodynamic (Ehd)-Enhanced Separation of Fine Liquid Droplets from Gas Flows-Application to Refrigeration and Petro-Chemical Processes (Inproceeding)

Second International Energy 2030 Conference, The Petroleum Institute, Abu Dhabi, UAE, 2008.

(Abstract | Links | BibTeX)

157.Performance Characterization of Two Selected Refrigerants in a Flat-Plate Micro-Tube Condenser

E. Al-Hajri, Sergeui V. Dessiatoun, Amir H. Shooshtari, Michael M. Ohadi

Performance Characterization of Two Selected Refrigerants in a Flat-Plate Micro-Tube Condenser (Inproceeding)

The Second International Energy 2030 Conference, The Petroleum Institute, Abu Dhabi, UAE, 2008.

(Abstract | Links | BibTeX)

156.Electrohydrodynamically Enhanced Oil Separation Systems

Y. Zhao, J. Lawler, Michael M. Ohadi

Electrohydrodynamically Enhanced Oil Separation Systems ()

2008, (Assignee: Advanced Thermal Environmental Concepts Ltd., Application Num: US 11/211,988, Patent Num: US7381246 B1).

(Abstract | Links | BibTeX)

155.Experimental and Numeral Simulation of Meso-Pumping of Liquid Nitrogen - Application to Cryogenic Spot Cooling of Sensors and Detectors

M. Rada, Amir H. Shooshtari, Michael M. Ohadi

Experimental and Numeral Simulation of Meso-Pumping of Liquid Nitrogen - Application to Cryogenic Spot Cooling of Sensors and Detectors (Journal Article)

Sensors and Actuators, A: Physical, 148 (1), pp. 271-279, 2008, ISSN: 0924-4247.

(Abstract | Links | BibTeX)

154.Alternative Energy Technologies—Price Effects on Future Energy Research Opportunities

Michael M. Ohadi, J. Qi

Alternative Energy Technologies—Price Effects on Future Energy Research Opportunities (Book Chapter)

Dekker, Marcel (Ed.): pp. 31-49 SE -, Taylor & Francis, New York, 1, 2008, ISBN: 0-8493-3653-8.

(Abstract | BibTeX)

153.Semi-Empirical Correlation of Gas Cooling Heat Transfer of Supercritical Carbon Dioxide in Microchannels

G. H. Kuang, Michael M. Ohadi, Sergeui V. Dessiatoun

Semi-Empirical Correlation of Gas Cooling Heat Transfer of Supercritical Carbon Dioxide in Microchannels (Journal Article)

HVAC&R Research, 14 (6), pp. 861-870, 2008, ISSN: 1078-9669.

(Abstract | Links | BibTeX)

152.Experimental Characterization of an Ehd Ion-Drag Micropump for Cryogenic Micro-Pumping Applications

P. Foroughi, Sergeui V. Dessiatoun, Amir H. Shooshtari, Michael M. Ohadi

Experimental Characterization of an Ehd Ion-Drag Micropump for Cryogenic Micro-Pumping Applications (Inproceeding)

pp. 1779-1786, 2008, ISBN: 0791843025; 9780791843024.

(Abstract | Links | BibTeX)

151.Force Fed Boiling and Condensation for High Heat Flux Applications

Edvin Cetegen, Sergeui V. Dessiatoun, Michael M. Ohadi

Force Fed Boiling and Condensation for High Heat Flux Applications (Inproceeding)

9th Minsk International Seminar on Heat Pipes, Heat Pumps, Refrigerators, Power Sources, Minsk, Belarus, 2008.

(Abstract | Links | BibTeX)

150.Heat Transfer Analysis of Force Fed Evaporation on Microgrooved Surfaces

Edvin Cetegen, Sergeui V. Dessiatoun, Michael M. Ohadi

Heat Transfer Analysis of Force Fed Evaporation on Microgrooved Surfaces (Inproceeding)

ASME 2008 6th International Conference on Nanochannels, Microchannels, and Minichannels, pp. 657-660, ASME, Nanotechnology Institute, Darmstadt, Germany, 2008, ISBN: 0-7918-4834-5.

(Abstract | Links | BibTeX)

149.Heat Transfer Analysis of Microgrooved Evaporator and Condenser Surfaces Utilized in a High Heat Flux Two-Phase Flow Loop

E. Cetegen, Sergeui V. Dessiatoun, T. Baummer, Michael M. Ohadi

Heat Transfer Analysis of Microgrooved Evaporator and Condenser Surfaces Utilized in a High Heat Flux Two-Phase Flow Loop (Inproceeding)

ASME 2007 International Mechanical Engineering Congress and Exposition, pp. 1031-1037, 2008, ISBN: 0791843025; 9780791843024.

(Abstract | Links | BibTeX)

148.Force-Fed Evaporation and Condensation Utilizing Advanced Micro-Structured Surfaces and Micro-Channels

Thomas B. Baummer, E. Cetegen, Michael M. Ohadi, Sergeui V. Dessiatoun

Force-Fed Evaporation and Condensation Utilizing Advanced Micro-Structured Surfaces and Micro-Channels (Journal Article)

Microelectronics Journal, 39 (7), pp. 975-980, 2008.

(Abstract | Links | BibTeX)

2007

147.Liquid Cooled Diamond Bearing Heat Sink

Saeed Moghaddam, John Lawler, Michael M. Ohadi

Liquid Cooled Diamond Bearing Heat Sink ()

2007, (Assignee: Saeed Moghaddam, Application Num: US 10/832,895, Patent Num: US7215545 B1).

(Abstract | BibTeX)

146.Studies on Condensation of Refrigerants in a High Aspect Ratio Minichannel and in a Novel Micro-Groove Surface Heat Exchanger - Development of Micro-Condensers in Compact Two Phase Cooling Systems

Sergeui V. Dessiatoun, Sourav Chowdhury, E. Al-Hajri, E. Cetegen, Michael M. Ohadi

Studies on Condensation of Refrigerants in a High Aspect Ratio Minichannel and in a Novel Micro-Groove Surface Heat Exchanger - Development of Micro-Condensers in Compact Two Phase Cooling Systems (Inproceeding)

ASME 2007 5th International Conference on Nanochannels, Microchannels, and Minichannels, pp. 109-116, 2007, ISBN: 079184272X; 9780791842720.

(Abstract | Links | BibTeX)

145.Electrohydrodynamically (Ehd) Enhanced Heat Transfer System and Method with an Encapsulated Electrode

Sergeui V. Dessiatoun, Igor Ivakhnenko, Michael M. Ohadi

Electrohydrodynamically (Ehd) Enhanced Heat Transfer System and Method with an Encapsulated Electrode ()

2007, (Assignee: University Of Maryland, Application Num: US 10/413,294, Patent Num: US7159646 B2).

(Abstract | BibTeX)

144.Studies on Condensation of Refrigerants in a High Aspect Ratio Microchannel and in a Novel Micro-Groove Surface Heat Exchanger: Development of Micro-Condensers in Compact Two Phase Cooling Systems

Sergeui V. Dessiatoun, Sourav Chowdhury, Ebrahim Al-Hajri, Edvin Cetegen, Michael M. Ohadi

Studies on Condensation of Refrigerants in a High Aspect Ratio Microchannel and in a Novel Micro-Groove Surface Heat Exchanger: Development of Micro-Condensers in Compact Two Phase Cooling Systems (Inproceeding)

ASME 2007 5th International Conference on Nanochannels, Microchannels, and Minichannels, pp. 109-116, ASME, Nanotechnology Institute, Puebla, Mexico, 2007, ISBN: 0-7918-4272-X.

(Abstract | Links | BibTeX)

2006

143.The Effect of Stationary and Sweeping Frequency Ac Electric Fields on Frost Crystal Removal on a Cold Plate

V. Tudor, Michael M. Ohadi

The Effect of Stationary and Sweeping Frequency Ac Electric Fields on Frost Crystal Removal on a Cold Plate (Journal Article)

International Journal of Refrigeration, 29 (4), pp. 669-677, 2006, ISSN: 0140-7007.

(Abstract | Links | BibTeX)

142.The Impact of a Thermal Spreader on the Temperature Distribution in a Plasma Display Panel

Amir H. Shooshtari, J. Kahn, A. Bar-Cohen, Sergeui V. Dessiatoun, Michael M. Ohadi, M. Getz, J. Norley

The Impact of a Thermal Spreader on the Temperature Distribution in a Plasma Display Panel (Inproceeding)

The Tenth Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronics Systems, pp. 395-401, IEEE, San Diego, CA, 2006, ISBN: 0780395247; 9780780395244.

(Abstract | Links | BibTeX)

141.A Self-Contained System for Thermal Management of Next Generation Radars and Solid-State

Michael M. Ohadi, Sergeui V. Dessiatoun, Thomas B. Baummer, Edvin Cetegen, Amir H. Shooshtari

A Self-Contained System for Thermal Management of Next Generation Radars and Solid-State (Technical Report)

(7th, 8th, 9th Quarterly Progress Report,), 2006.

(Abstract | BibTeX)

140.Slit-Type Restrictor for Controlling Flow Delivery to Electrohydrodynamic Thin Film Evaporator

Saeed Moghaddam, Michael M. Ohadi

Slit-Type Restrictor for Controlling Flow Delivery to Electrohydrodynamic Thin Film Evaporator ()

2006, (Assignee: Atec Advanced Thermal And Environmental Concepts, Application Num: US 10/685,630, Patent Num: US7108056 B1).

(Abstract | BibTeX)

139.Measurement of Corona Wind Velocity and Calculation of Energy Conversion Efficiency for Air-Side Heat Transfer Enhancement in Compact Heat Exchangers

S. Moghaddam, K. T. Kiger, Michael M. Ohadi

Measurement of Corona Wind Velocity and Calculation of Energy Conversion Efficiency for Air-Side Heat Transfer Enhancement in Compact Heat Exchangers (Journal Article)

HVAC&R Research, 12 (1), pp. 57-68, 2006.

(Abstract | Links | BibTeX)

138.A Proposed Particle Image Velocimetry (Piv) System for Instructional Purposes in a Modern Mechanical Engineering Undergraduate Laboratory Program

A. Goharzadeh, A. Molki, Michael M. Ohadi

A Proposed Particle Image Velocimetry (Piv) System for Instructional Purposes in a Modern Mechanical Engineering Undergraduate Laboratory Program (Inproceeding)

113th Annual ASEE Conference and Exposition, 2006.

(Abstract | Links | BibTeX)

137.A Experimental Study of Condensation Heat Transfer and Pressure Drop in a Single High Aspect Ratio Micro-Channel for Refrigerant R134a

Sourav Chowdhury, Ebrahim Al-Hajri, Sergeui V. Dessiatoun, Amir H. Shooshtari, Michael M. Ohadi

A Experimental Study of Condensation Heat Transfer and Pressure Drop in a Single High Aspect Ratio Micro-Channel for Refrigerant R134a (Inproceeding)

ASME 4th International Conference on Nanochannels, Microchannels, and Minichannels, pp. 147-154, ASME, Nanotechnology Institute, Limerick, Ireland, 2006, ISBN: 0791847608; 9780791847602.

(Abstract | Links | BibTeX)

136.Forced Convection Boiling in Microchannels for Improved Heat Transfer

Thomas B. Baummer, Michael M. Ohadi, E. Al-Hajri, Sergeui V. Dessiatoun

Forced Convection Boiling in Microchannels for Improved Heat Transfer (Inproceeding)

4th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2006, pp. 635-640, 2006, ISBN: 0791847608; 9780791847602.

(Abstract | Links | BibTeX)

135.Direct Liquid Cooling of High Flux Micro and Nano Electronic Components

A. Bar-Cohen, M. Arik, Michael M. Ohadi

Direct Liquid Cooling of High Flux Micro and Nano Electronic Components (Journal Article)

Proceedings of the IEEE, 94 (8), pp. 1549-1570, 2006.

(Abstract | Links | BibTeX)

2005

134.Use of Printed Circuit Board as Electrode in Ehd-Enhanced Condensation Experiments for a Shell/Tube Bundle Heat Exchanger

J. Wu, Michael M. Ohadi, Sergeui V. Dessiatoun, J. Qi

Use of Printed Circuit Board as Electrode in Ehd-Enhanced Condensation Experiments for a Shell/Tube Bundle Heat Exchanger (Inproceeding)

ASME 2005 Summer Heat Transfer Conference collocated with the ASME 2005 Pacific Rim Technical Conference and Exhibition on Integration and Packaging of MEMS, NEMS, and Electronic Systems, pp. 589-592, ASME, Heat Transfer Division and Electronic and Photonic Packaging Division, San Francisco, California, 2005, ISBN: 0-7918-4732-2.

(Abstract | Links | BibTeX)

133.Experimental Study on Embedded-Wire Electrode for End-Enhanced Condensation in a Shell/Tube Bundle Heat Exchanger

J. Wu, Michael M. Ohadi, Sergeui V. Dessiatoun, J. Qi

Experimental Study on Embedded-Wire Electrode for End-Enhanced Condensation in a Shell/Tube Bundle Heat Exchanger (Inproceeding)

ASME 2005 International Mechanical Engineering Congress and Exposition, pp. 311-315, ASME, Heat Transfer Division, Orlando, Florida, 2005, ISBN: 0791842215, 9780791842218, 02725673 (ISSN).

(Abstract | Links | BibTeX)

132.Advances in Control of Frost on Evaporator Coils with an Applied Electric Field

V. Tudor, Michael M. Ohadi, M. A. Salehi, J. V. Lawler

Advances in Control of Frost on Evaporator Coils with an Applied Electric Field (Journal Article)

International Journal of Heat and Mass Transfer, 48 (21-22), pp. 4428-4434, 2005, ISSN: 0017-9310.

(Abstract | Links | BibTeX)

131.Control of Frost Accumulation on a Horizontal Cold Plate Using Dc Electric Fields

V. Tudor, Michael M. Ohadi

Control of Frost Accumulation on a Horizontal Cold Plate Using Dc Electric Fields (Inproceeding)

pp. 21-30, 2005, ISBN: 0791842215, 9780791842218, 02725673 (ISSN).

(Abstract | Links | BibTeX)

130.Numerical Modeling of Dissociation-Injection Process for the Electrohydrodynamic Pumping

Amir H. Shooshtari, Sourav Chowdhury, Michael M. Ohadi

Numerical Modeling of Dissociation-Injection Process for the Electrohydrodynamic Pumping (Inproceeding)

ASME 2005 International Mechanical Engineering Congress and Exposition, pp. 373-381, 2005, ISBN: 0791842347, 9780791842348, 10716939 (ISSN).

(Abstract | Links | BibTeX)

129.Thermal Performance of Micro-Structured Evaporation Surfaces-Application to Cooling of High Flux Microelectronics

E. Al-Hajri, Michael M. Ohadi, Sergeui V. Dessiatoun, J. Qi

Thermal Performance of Micro-Structured Evaporation Surfaces-Application to Cooling of High Flux Microelectronics (Inproceeding)

ASME 2005 International Mechanical Engineering Congress and Exposition, pp. 799-805, ASME, Heat Transfer Division, Orlando, Florida, 2005, ISBN: 0791842215, 9780791842218, 02725673 (ISSN).

(Abstract | Links | BibTeX)

128.An Undergraduate Instructional Laboratory Model for a Modern Mechanical Engineering Program

Michael M. Ohadi, M. Sheu, A. Molki

An Undergraduate Instructional Laboratory Model for a Modern Mechanical Engineering Program (Inproceeding)

ASEE Annual Conference and Exposition, pp. 14643-14651, 2005.

(Abstract | Links | BibTeX)

127.Ultra — Thin Film Evaporation (Utf) — Application to Emerging Technologies in Cooling of Microelectronics

Michael M. Ohadi, J. Qi, J. Lawler

Ultra — Thin Film Evaporation (Utf) — Application to Emerging Technologies in Cooling of Microelectronics (Book Chapter)

Kakaç,; Vasiliev,; Bayazitoğlu,; Yener, (Ed.): Microscale Heat Transfer Fundamentals and Applications, pp. 321-338, Springer Netherlands, 2005, ISBN: 978-1-4020-3359-9, 978-1-4020-3361-2.

(BibTeX)

126.Higher Energy Prices and the Research and Development Opportunities They Present

Michael M. Ohadi, Jianwei Qi

Higher Energy Prices and the Research and Development Opportunities They Present (Inproceeding)

VI Minsk International Seminar Heat Pipes, Heat Pumps, Refrigerators, pp. 233-245, 2005.

(Abstract | BibTeX)

125.Effect of Electrode Geometry on Performance of an Ehd Thin-Film Evaporator

S. Moghaddam, Michael M. Ohadi

Effect of Electrode Geometry on Performance of an Ehd Thin-Film Evaporator (Journal Article)

Journal of Microelectromechanical Systems, 14 (5), pp. 978-986, 2005, ISSN: 1057-7157.

(Abstract | Links | BibTeX)

124.Electrohydrodynamic (Ehd) Thin Film Evaporator with Splayed Electrodes

Saeed Moghaddam, Michael M. Ohadi

Electrohydrodynamic (Ehd) Thin Film Evaporator with Splayed Electrodes ()

2005, (Assignee: Atec Advanced Thermal And Environmental Concepts, Application Num: US 10/685,630, Patent Num: US7108056 B1).

(Abstract | BibTeX)

123.Oil Price Increases and the Energy Industry: What Role for the Majors? Part Ii: Technical Analysis

D. Garis, Michael M. Ohadi

Oil Price Increases and the Energy Industry: What Role for the Majors? Part Ii: Technical Analysis (Inproceeding)

pp. 1451-1461, 2005.

(Abstract | Links | BibTeX)

122.Oil Price Increases and the Energy Industry: What Role for the Majors? Part I: Economic Analysis and Part Ii: Technical Analysis

D. Garis, Michael M. Ohadi

Oil Price Increases and the Energy Industry: What Role for the Majors? Part I: Economic Analysis and Part Ii: Technical Analysis (Inproceeding)

SPE Middle East Oil and Gas Show and Conference, MEOS, Proceedings, pp. 1443-1450, 2005.

(Abstract | Links | BibTeX)

121.Development of Electrohydrodynamic (Ehd) Micropumps for Cryogenic Applications

P. Foroughi, Y. Zhao, J. Lawler, Michael M. Ohadi

Development of Electrohydrodynamic (Ehd) Micropumps for Cryogenic Applications (Inproceeding)

Space Technology and Applications International Forum - STAIF 2005, pp. 46-54, AIP Publishing, 2005, ISBN: 0735402302; 9780735402300, 0094243X (ISSN).

(Abstract | Links | BibTeX)

120.Design, Testing and Optimization of a Micropump for Cryogenic Spot Cooling Applications

P. Foroughi, V. Benetis, Michael M. Ohadi, Y. Zhao, J. Lawler

Design, Testing and Optimization of a Micropump for Cryogenic Spot Cooling Applications (Inproceeding)

2005 IEEE Twenty First Annual IEEE Semiconductor Thermal Measurement and Management Symposium, pp. 335-340, IEEE, 2005, ISBN: 0780389859, 10652221 (ISSN).

(Abstract | Links | BibTeX)

119.Numerical Modeling of an Ion-Drag Micropump Performance

Vytenis Benetis, Amir H. Shooshtari, Michael M. Ohadi

Numerical Modeling of an Ion-Drag Micropump Performance (Inproceeding)

ASME 2005 International Mechanical Engineering Congress and Exposition, pp. 679-687, ASME, Microelectromechanical Systems Division, Orlando, Florida, 2005, ISBN: 0-7918-4224-X.

(Abstract | Links | BibTeX)

2004

118.Experimental Study of Supercritical Co 2 Gas Cooling in a Microchannel Gas Cooler

Y. Zhao, Michael M. Ohadi

Experimental Study of Supercritical Co 2 Gas Cooling in a Microchannel Gas Cooler (Inproceeding)

ASHRAE Transactions, pp. 291-300, 2004, ISSN: 12505.

(Abstract | Links | BibTeX)

117.Thermal Management of Harsh-Environment Electronics

Michael M. Ohadi, J. Qi

Thermal Management of Harsh-Environment Electronics (Inproceeding)

Annual IEEE Semiconductor Thermal Measurement and Management Symposium, pp. 231-240, 2004, ISSN: 10652221.

(Abstract | Links | BibTeX)

116.Heat Exchangers

Michael M. Ohadi

Heat Exchangers (Book Chapter)

Dorf, Richard (Ed.): The Engineering Handbook, pp. 1-52, CRC Press, Second, 2004, ISBN: 978-0-8493-1586-2.

(Abstract | BibTeX)

115.Experimental Study on Gas Cooling Heat Transfer for Supercritical Co2 in Microchannels

G. Kuang, Michael M. Ohadi, Y. Zhao

Experimental Study on Gas Cooling Heat Transfer for Supercritical Co2 in Microchannels (Inproceeding)

S.G, Kandlikar; G.P, Celata; S, Nishio; P, Stephan; B, Thonon (Ed.): ASME 2004 2nd International Conference on Microchannels and Minichannels, pp. 325-332, ASME, Nanotechnology Institute, Rochester, New York, 2004, ISBN: 0-7918-4164-2.

(Abstract | Links | BibTeX)

114.Advanced Microchannel Heat Exchangers: Structural Analysis

G. Kuang, B. Balachandran, Michael M. Ohadi, Yuan Zhao

Advanced Microchannel Heat Exchangers: Structural Analysis (Inproceeding)

ASME 2004 International Mechanical Engineering Congress and Exposition, pp. 37-42, ASME, Heat Transfer Division, Anaheim, California, 2004, ISBN: 0-7918-4711-X.

(Abstract | Links | BibTeX)

113.External Electric Field as the Factor of Heat Transfer Enhancement in the System with Refrigerator Agent R-134a

A. Bologa, Michael M. Ohadi

External Electric Field as the Factor of Heat Transfer Enhancement in the System with Refrigerator Agent R-134a (Journal Article)

Surface Engineering and Applied Electrochemistry (Elektronnaya Obrabotka Materialov), (6), pp. 49-52, 2004.

(Abstract | Links | BibTeX)

112.Heat Transfer Equipment : Introduction

S. Beale, A. Fakheri, A. Muley, Michael M. Ohadi, H. Strumpf, B. Sunden

Heat Transfer Equipment : Introduction (Inproceeding)

ASME International Mechanical Engineering Congress and Exposition, pp. 7-7, American Society of Mechanical Engineers, Heat Transfer Division, 2004, ISSN: 2725673.

(Links | BibTeX)

2003

111.Experimental Heat Transfer Coefficients of Co 2 in a Microchannel Evaporator

Y. Zhao, Michael M. Ohadi, F. H. R. França

Experimental Heat Transfer Coefficients of Co 2 in a Microchannel Evaporator (Inproceeding)

ASHRAE 2003 Winter Meeting, pp. 527-535, ASHRAE, Chicago, IL, 2003.

(Abstract | Links | BibTeX)

110.Development of an Electrohydrodynamic (Ehd) Micro Pump for Ln2 Spot Cooling

Y. Zhao, J. Lawler, P. Foroughi, Michael M. Ohadi

Development of an Electrohydrodynamic (Ehd) Micro Pump for Ln2 Spot Cooling (Inproceeding)

ASME International Mechanical Engineering Congress, pp. 113-118, American Society of Mechanical Engineers, Process Industries Division, Washington, DC, 2003, ISBN: 0791837254; 9780791837252.

(Abstract | Links | BibTeX)

109.Electrohydrodynamically (Ehd) Augmented External Condensation for R-134a in a Tube Bundle Heat Exchanger

J. Wu, Michael M. Ohadi, S. Thorpe, J. Qi

Electrohydrodynamically (Ehd) Augmented External Condensation for R-134a in a Tube Bundle Heat Exchanger (Inproceeding)

ASME 2003 International Mechanical Engineering Congress and Exposition, pp. 123-128, ASME, Heat Transfer Division, Washington, DC, 2003, ISBN: 0-7918-3718-1.

(Abstract | Links | BibTeX)

108.An Experimental Investigation on Frost Control Using Dc and Ac Electric Fields on a Horizontal, Downward-Facing Plate

V. Tudor, Michael M. Ohadi, F. H. R. Franca

An Experimental Investigation on Frost Control Using Dc and Ac Electric Fields on a Horizontal, Downward-Facing Plate (Journal Article)

Hvac&R Research, 9 (2), pp. 203-213, 2003, ISSN: 1078-9669.

(Abstract | Links | BibTeX)

107.Experimental and Numerical Analysis of Electrohydrodynamic Enhancement of Heat Transfer in Air Laminar Channel Flow

Amir H. Shooshtari, Michael M. Ohadi, F.H.R. Franca

Experimental and Numerical Analysis of Electrohydrodynamic Enhancement of Heat Transfer in Air Laminar Channel Flow (Inproceeding)

Ninteenth Annual IEEE Semiconductor Thermal Measurement and Management Symposium, 2003, pp. 48-52, IEEE, 2003, ISSN: 0-7803-7793-1.

(Abstract | Links | BibTeX)

106.Enhanced Flow Boiling of R-134a in a Minichannel Plate Evaporator

A. P. Rupani, M. Molki, Michael M. Ohadi, F. H. R. França

Enhanced Flow Boiling of R-134a in a Minichannel Plate Evaporator (Journal Article)

Journal of Enhanced Heat Transfer, 10 (1), pp. 1-7, 2003.

(Abstract | Links | BibTeX)

105.An Electrohydrodynamic (Ehd) Meso Pump for Cryogenic Spot Cooling of Low Volume Complex Electronics

M. Rada, Michael M. Ohadi, Amir H. Shooshtari

An Electrohydrodynamic (Ehd) Meso Pump for Cryogenic Spot Cooling of Low Volume Complex Electronics (Inproceeding)

ASME 2003 International Mechanical Engineering Congress and Exposition, pp. 105-111, ASME, Process Industries Division, Washington, DC, 2003, ISBN: 0-7918-3725-4.

(Abstract | Links | BibTeX)

104.Electrohydrodynamic Liquid-Vapor Separator

Michael M. Ohadi, Sergeui V. Dessiatoun, Igor Ivakhnenko

Electrohydrodynamic Liquid-Vapor Separator ()

2003, (Assignee: University Of Maryland, Application Num: US 09/927,213, Patent Num: US6582500 B1).

(Abstract | BibTeX)

103.Evaluation of Analytical Models for Thermal Analysis and Design of Electronic Packages

S. Moghaddam, M. Rada, Amir H. Shooshtari, Michael M. Ohadi, Y. Joshi

Evaluation of Analytical Models for Thermal Analysis and Design of Electronic Packages (Journal Article)

Microelectronics Journal, 34 (3), pp. 223-230, 2003.

(Abstract | Links | BibTeX)

102.Experimental Study of the Spalyed Electrode Design on Perfromance of a Microfabricated Ehd Thin Film Evaporator - Application in High Heat Flux Cooling

S. Moghaddam, Michael M. Ohadi, C. McCaffery

Experimental Study of the Spalyed Electrode Design on Perfromance of a Microfabricated Ehd Thin Film Evaporator - Application in High Heat Flux Cooling (Inproceeding)

ASME Summer Heat Transfer Conference (HT2003), pp. 439-444, ASME, Las Vegas, NV, 2003, ISBN: 0791836940; 9780791836941.

(Abstract | Links | BibTeX)

101.Pool Boiling of Water and Fc-72 on Copper and Graphite Foams

S. Moghaddam, Michael M. Ohadi, J. Qi

Pool Boiling of Water and Fc-72 on Copper and Graphite Foams (Inproceeding)

Advances in Electronic Packaging, pp. 675-680, International Electronic Packaging Technical Conference and Exhibition, Maui, HI, 2003, ISBN: 0791836916; 9780791836910.

(Abstract | Links | BibTeX)

100.Fabrication and Testing of a Novel Microelectromechanical Device for the Study of Boiling Bubble Dynamics

S. Moghaddam, J. M. Henriette, K. T. Kiger, Michael M. Ohadi

Fabrication and Testing of a Novel Microelectromechanical Device for the Study of Boiling Bubble Dynamics (Inproceeding)

ASME International Mechanical Engineering Congress, pp. 107-114, American Society of Mechanical Engineers, Micro-Electromechanical Systems Division, Washington, DC, 2003, ISBN: 0791837211; 9780791837214.

(Abstract | Links | BibTeX)

99.Experimental Study of Miscible and Immiscible Oil Effects on Heat Transfer Coefficients and Pressure Drop in Microchannel Gas Cooling of Supercritical Co2

Guohua Kuang, Michael M. Ohadi, Yuan Zhao

Experimental Study of Miscible and Immiscible Oil Effects on Heat Transfer Coefficients and Pressure Drop in Microchannel Gas Cooling of Supercritical Co2 (Inproceeding)

ASME 2003 Heat Transfer Summer Conference, pp. 671-675, ASME, Heat Transfer Division, Las Vegas, Nevada, 2003, ISBN: 0-7918-3694-0.

(Abstract | Links | BibTeX)

98.Experimental Study on Pool Boiling of Fc-72 in Graphite Foams

Radwan Kalo, Jianwei Qi, Michael M. Ohadi

Experimental Study on Pool Boiling of Fc-72 in Graphite Foams (Inproceeding)

6th ASME-JSME conference, pp. 280, ASME/JSME, 2003.

(Abstract | BibTeX)

97.A Source-Integrated Micropump for Cooling of High Heat Flux Electronics

V. Benetis, A Shooshtari, P. Foroughi, Michael M. Ohadi

A Source-Integrated Micropump for Cooling of High Heat Flux Electronics (Inproceeding)

Ninteenth Annual IEEE Semiconductor Thermal Measurement and Management Symposium, 2003, pp. 236-241, IEEE, 2003, ISBN: 0-7803-7793-1.

(Abstract | Links | BibTeX)

96.Process Industries: Foreword

N. Amineni, J. Darabi, A. Fakhri, A. Engeda, J. Lawler, M. Molki, A. Muley, N. Muller, M. Nash, Michael M. Ohadi, B. Sunden

Process Industries: Foreword (Inproceeding)

ASME International Mechanical Engineering, American Society of Mechanical Engineers, Process Industries Division, Washington, DC, 2003, ISBN: 0791837254; 9780791837252.

(Links | BibTeX)

2002

95.Flow Boiling of Co2 with Miscible Oil in Microchannels

Y. Zhao, M. Molki, Michael M. Ohadi, F. H. R. França, R. Radermacher, G. D. Mathur, K. Cho

Flow Boiling of Co2 with Miscible Oil in Microchannels (Inproceeding)

ASHRAE Winter Meeting, pp. 135-144, ASHRAE, Atlantic City, NJ, 2002, ISSN: 12505.

(Abstract | Links | BibTeX)

94.Electronics Spot Cooling with Liquid Nitrogen

M. Rada, Amir H. Shooshtari, Michael M. Ohadi, F. H. R. França, J. Lawler

Electronics Spot Cooling with Liquid Nitrogen (Inproceeding)

ASME 2002 International Mechanical Engineering Congress and Exposition, pp. 1-11, ASME, Process Industries Division, New Orleans, Louisiana, 2002, ISBN: 0-7918-3644-4.

(Abstract | Links | BibTeX)

93.Ehd-Assisted Condensation of Refrigerant R-134a on Tube Bundles

M. Molki, Michael M. Ohadi, L. W. Da Silva

Ehd-Assisted Condensation of Refrigerant R-134a on Tube Bundles (Inproceeding)

8th AIAA/ASME Joint Thermophysics and Heat Transfer Conference, AIAA/ASME, St. Louis, MO, 2002, ISBN: 9781624101182.

(Abstract | Links | BibTeX)

92.Thermal Challenges in Next Generation Electronic Systems

S. Moghaddam, M. Rada, Amir H. Shooshtari, Michael M. Ohadi, Y. Joshi

Thermal Challenges in Next Generation Electronic Systems (Inproceeding)

Thermal Challenges in Next Generation Electronic Systems, pp. 355-364, Millpress, 2002, ISBN: 90-77017-03-8.

(Abstract | BibTeX)

91.Evaluation of 1-D & 2-D Models for Thermal Insulation Thickness Calculation in Electronic Packaging

S. Moghaddam, M. Rada, Amir H. Shooshtari, Michael M. Ohadi, Y. Joshi

Evaluation of 1-D & 2-D Models for Thermal Insulation Thickness Calculation in Electronic Packaging (Inproceeding)

Thermal Challenges in Next Generation Electronic Systems, pp. 355-364, Millpress, 2002, ISBN: 90-77017-03-8.

(Abstract | BibTeX)

90.Ehd-Enhanced Condensation of Alternative Refrigerants in Smooth and Corrugated Tubes

A. Gidwani, M. Molki, Michael M. Ohadi

Ehd-Enhanced Condensation of Alternative Refrigerants in Smooth and Corrugated Tubes (Journal Article)

HVAC and R Research, 8 (3), pp. 219-237, 2002, ISSN: 1078-9669.

(Abstract | Links | BibTeX)

89.Design, Fabrication, and Testing of an Electrohydrodynamic Ion-Drag Micropump

J. Darabi, M. Rada, Michael M. Ohadi, J. Lawler

Design, Fabrication, and Testing of an Electrohydrodynamic Ion-Drag Micropump (Journal Article)

Journal of Microelectromechanical Systems, 11 (6), pp. 684-690, 2002.

(Abstract | Links | BibTeX)

88.Electrohydrodynamicly Enhanced Micro Cooling System for Integrated Circuits

Jafar Darabi, Michael M. Ohadi

Electrohydrodynamicly Enhanced Micro Cooling System for Integrated Circuits ()

2002, (Assignee: Jafar Darabi, Application Num: US 09/798,321, Patent Num: US6443704 B1).

(Abstract | BibTeX)

87.Chip-Integrated Micro Cooling System for High Heat Flux Electronic Cooling Applications

Sourav Chowdhury, Jafar Darabi, Michael M. Ohadi, John Lawler

Chip-Integrated Micro Cooling System for High Heat Flux Electronic Cooling Applications (Inproceeding)

Thermal Challenges in Next Generation Electronic Systems, pp. 85-93, Millpress, Santa Fe, New Mexico, 2002, ISBN: 90-77017-03-8.

(Abstract | BibTeX)

2001

86.Predicting Flow Boiling Heat Transfer of Co2 in Microchannels

Y. Zhao, M. Molki, Michael M. Ohadi

Predicting Flow Boiling Heat Transfer of Co2 in Microchannels (Inproceeding)

Y, Jaluria; C, Presser; F.M, Gerner; C.Y, Wang; S, Kearny; W, Grosshandler; A.K, Gupta (Ed.): ASME International Mechanical Engineering Congress and Exposition, pp. 205-210, American Society of Mechanical Engineers, 2001, ISSN: 2725673.

(Abstract | Links | BibTeX)

85.Electrohydrodynamic Pumping of Liquid Nitrogen Using a Mesoscale Ion-Drag Pump

M. Rada, Jafar Darabi, Michael M. Ohadi, John Lawler

Electrohydrodynamic Pumping of Liquid Nitrogen Using a Mesoscale Ion-Drag Pump (Inproceeding)

36th Intersociety Energy Conversion Engineering Conference, pp. 1137-1143, American Society of Mechanical Engineers, Savannah, GA, 2001, ISSN: 0146955X.

(Abstract | Links | BibTeX)

84.High Temperature Heat Exchangers and Microscale Combustion Systems: Applications to Thermal System Miniaturization

Michael M. Ohadi, S. G. Buckley

High Temperature Heat Exchangers and Microscale Combustion Systems: Applications to Thermal System Miniaturization (Journal Article)

Experimental Thermal and Fluid Science, 25 (5), pp. 207-217, 2001, ISSN: 0894-1777.

(Abstract | Links | BibTeX)

83.An Electrohydrodynamic Polarization Micropump for Electronic Cooling

J. Darabi, Michael M. Ohadi, D. DeVoe

An Electrohydrodynamic Polarization Micropump for Electronic Cooling (Journal Article)

Journal of Microelectromechanical Systems, 10 (1), pp. 98-106, 2001, ISSN: 1057-7157.

(Abstract | Links | BibTeX)

82.Effect of Polarity on Electrohydrodynamic Enhancement of R-134a Condensation on Enhanced Tubes

L.W. Da Silva, Majid Molki, Michael M. Ohadi

Effect of Polarity on Electrohydrodynamic Enhancement of R-134a Condensation on Enhanced Tubes (Inproceeding)

35th National Heat Transfer Conference, pp. 431-438, American Society of Mechanical Engineers, 2001, ISBN: 791835332.

(Abstract | Links | BibTeX)

2000

81.Heat Transfer and Pressure Drop of Co2 Flow Boiling in Microchannels

Yuan Zhao, Michael M. Ohadi, Majid Molki, Sergeui V. Dessiatoun

Heat Transfer and Pressure Drop of Co2 Flow Boiling in Microchannels (Inproceeding)

International Mechanical Engineering Congress and Exposition, pp. 243-249, American Society of Mechanical Engineers, Orlando, Florida, 2000, ISBN: 791819086.

(Abstract | Links | BibTeX)

80.Flow Boiling of Co2 in Microchannels

Yuan Zhao, Majid Molki, Michael M. Ohadi, Sergeui V. Dessiatoun

Flow Boiling of Co2 in Microchannels (Inproceeding)

ASHRAE Winter Meeting, pp. 1226-1235, ASHRAE Transactions, 2000.

(Abstract | Links | BibTeX)

79.Flow Condensation in Smooth and Micro-Fin Tubes with Hcfc-22, Hfc-134a and Hfc-410 Refrigerants. Part Ii: Design Equations

L. Tang, Michael M. Ohadi, A. T. Johnson

Flow Condensation in Smooth and Micro-Fin Tubes with Hcfc-22, Hfc-134a and Hfc-410 Refrigerants. Part Ii: Design Equations (Journal Article)

Journal of Enhanced Heat Transfer, 7 (5), pp. 311-325, 2000.

(Abstract | Links | BibTeX)

78.Effect of Electric Field on Flow Pattern in Flow Boiling of R-134a - a Visualization Study

M. Salehi, M. Molki, Michael M. Ohadi

Effect of Electric Field on Flow Pattern in Flow Boiling of R-134a - a Visualization Study (Journal Article)

American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 365 , pp. 127-136, 2000.

(Abstract | Links | BibTeX)

77.Condensers

Michael M. Ohadi, Sergeui V. Dessiatoun, P. Thors

Condensers (Book Chapter)

Ashrae Systems and Equipment Handbook, American Society of Heating, Refrigerating, and Air Conditioning Engineers, Atlanta, Georgia, 1996, 2000, 2000.

(Abstract | BibTeX)

76.Electrode Design, Fabrication, and Materials Science for Ehd-Enhanced Heat and Mass Transport

Michael M. Ohadi, J. Darabi, B. Roget

Electrode Design, Fabrication, and Materials Science for Ehd-Enhanced Heat and Mass Transport (Book Chapter)

Annual Review of Heat Transfer, 11 , pp. 563-632, Begell House, Inc., New York, 2000, ISBN: 1049-0787.

(Abstract | BibTeX)

75.Frost Reduction under Intermittent Electric Field

Majid Molki, Michael M. Ohadi, M. Bloshteyn

Frost Reduction under Intermittent Electric Field (Inproceeding)

34th National Heat Transfer Conference, American Society of Mechanical Engineers, Pittsburg, PA, 2000, ISBN: 791835103.

(BibTeX)

74.Corona Discharge Effects on Heat Transfer and Pressure Drop in Tube Flows

D. A. Nelson, S. Zia, R. L. Whipple, Michael M. Ohadi

Corona Discharge Effects on Heat Transfer and Pressure Drop in Tube Flows (Journal Article)

Journal of Enhanced Heat Transfer, 7 (2), pp. 81-95, 2000, ISSN: 1065-5131.

(Abstract | Links | BibTeX)

73.Heat Transfer Enhancement of Airflow in a Channel Using Corona Discharge

M. Molki, Michael M. Ohadi, B. Baumgarten, M. Hasegawa, A. Yabe

Heat Transfer Enhancement of Airflow in a Channel Using Corona Discharge (Journal Article)

Journal of Enhanced Heat Transfer, 7 (6), pp. 411-425, 2000, ISSN: 1065-5131.

(Abstract | Links | BibTeX)

72.Development of the Semi-Empirical Correlations for an Ehd-Enhanced Cpl

Majid Molki, Michael M. Ohadi, M. Bloshteyn

Development of the Semi-Empirical Correlations for an Ehd-Enhanced Cpl (Inproceeding)

National Heat Transfer Conference, American Society of Mechanical Engineers, Pittsburgh, PA, 2000.

(BibTeX)

71.Capillary Pumped-Loop Thermal Performance Improvement with Electrohydrodynamic Technique

B. Mo, Michael M. Ohadi, Sergeui V. Dessiatoun, K. R. Wrenn

Capillary Pumped-Loop Thermal Performance Improvement with Electrohydrodynamic Technique (Journal Article)

Journal of Thermophysics and Heat Transfer, 14 (1), pp. 103-108, 2000, ISSN: 0887-8722.

(Abstract | Links | BibTeX)

70.Effect of Heating Boundary Conditions on Pool Boiling Experiments

J. Darabi, Michael M. Ohadi, M. A. Fanni, Sergeui V. Dessiatoun, M. A. Kedzierski

Effect of Heating Boundary Conditions on Pool Boiling Experiments (Inproceeding)

ASHRAE Winter Meeting, pp. PA/-PA/, ASHRAE, 2000, ISBN: 12505.

(Abstract | Links | BibTeX)

69.Compound Augmentation of Pool Boiling on Three Selected Commercial Tubes

J. Darabi, Michael M. Ohadi, Sergeui V. Dessiatoun

Compound Augmentation of Pool Boiling on Three Selected Commercial Tubes (Journal Article)

Journal of Enhanced Heat Transfer, 7 (5), pp. 347-360, 2000.

(Abstract | Links | BibTeX)

68.Falling Film and Spray Evaporation Enhancement Using an Applied Electric Field

J. Darabi, Michael M. Ohadi, Sergeui V. Dessiatoun

Falling Film and Spray Evaporation Enhancement Using an Applied Electric Field (Journal Article)

Journal of Heat Transfer, 122 (4), pp. 741-748, 2000, ISSN: 0022-1481.

(Abstract | Links | BibTeX)

67.Augmentation of Thin Falling-Film Evaporation on Horizontal Tubes Using an Applied Electric Field

J. Darabi, Michael M. Ohadi, Sergeui V. Dessiatoun

Augmentation of Thin Falling-Film Evaporation on Horizontal Tubes Using an Applied Electric Field (Journal Article)

Journal of Heat Transfer, 122 (2), pp. 391-398, 2000, ISSN: 0022-1481.

(Abstract | Links | BibTeX)

66.Electrohydrodynamic Enhancement of R-134a Condensation on Enhanced Tubes

L.W. Da Silva, M. Molki, Michael M. Ohadi

Electrohydrodynamic Enhancement of R-134a Condensation on Enhanced Tubes (Inproceeding)

Industry Applications Conference, pp. 757-764 vol.2, IEEE, Rome, 2000, ISBN: 0-7803-6401-5.

(Abstract | Links | BibTeX)

1999

65.Forced Convection Boiling Heat Transfer of Co2 in Horizontal Tubes

Yuan Zhao, Michael M. Ohadi, Sergeui V. Dessiatoun, Majid Molki, Jafar Darabi

Forced Convection Boiling Heat Transfer of Co2 in Horizontal Tubes (Inproceeding)

5th ASME/JSME Thermal Engineering Joint Conference, ASME, San Diego, CA, 1999.

(BibTeX)

64.Enhanced Pool Boiling of R-123 Refrigerant on Two Selected Tubes

M. H. Saidi, Michael M. Ohadi, M. Souhar

Enhanced Pool Boiling of R-123 Refrigerant on Two Selected Tubes (Journal Article)

Applied Thermal Engineering, 19 (8), pp. 885-895, 1999, ISSN: 1359-4311.

(Abstract | Links | BibTeX)

63.Ehd Enhancement of Single-Phase and Phase-Change Heat Transfer - Application to Smart Heat Exchangers

Michael M. Ohadi

Ehd Enhancement of Single-Phase and Phase-Change Heat Transfer - Application to Smart Heat Exchangers (Technical Report)

CEEE EHD Consortium (II-16-cum30, II-17-cum31, II-18-cum32), 1999.

(BibTeX)

62.Ehd Enhancement of Boiling/Condensation, Heat Transfer of Alternate Refrigerants

Michael M. Ohadi

Ehd Enhancement of Boiling/Condensation, Heat Transfer of Alternate Refrigerants (Technical Report)

University of Maryland (US) (DE-FG02-93CE23803.A000, DE-FG02-93CE2380), 1999.

(Abstract | Links | BibTeX)

61.Startup Time Reduction in an Electrohydrodynamically Enhanced Capillary Pumped Loop

B. Mo, Michael M. Ohadi, Sergeui V. Dessiatoun, Kwok H. Cheung

Startup Time Reduction in an Electrohydrodynamically Enhanced Capillary Pumped Loop (Journal Article)

Journal of Thermophysics and Heat Transfer, 13 (1), pp. 134-139, 1999, ISSN: 0887-8722.

(Abstract | Links | BibTeX)

60.Flow Management Using Ehd Forces

Jeffrey Didion, Michael M. Ohadi, Sergeui V. Dessiatoun, Majid Molki

Flow Management Using Ehd Forces (Technical Report)

Center for Environmental Energy Engineering, Department of Mechanical Engineering, University of Maryland 1999.

(BibTeX)

59.Effect of Heating Boundary Conditions on Pool Boiling Experiments

J. Darabi, Michael M. Ohadi, M. A. Fanni, Sergeui V. Dessiatoun, M. A. Kedzierski

Effect of Heating Boundary Conditions on Pool Boiling Experiments (Journal Article)

Hvac&R Research, 5 (4), pp. 283-296, 1999, ISSN: 1078-9669.

(Abstract | Links | BibTeX)

58.Development of an Active Cooling Device Using Mems Technology

Jafar Darabi, Michael M. Ohadi, Sergeui V. Dessiatoun, Majid Molki

Development of an Active Cooling Device Using Mems Technology (Technical Report)

Center for Environmental Energy Engineering, Department of Mechanical Engineering, University of Maryland 1999.

(BibTeX)

57.Electrode Optimization for an Ehd-Enhanced Capillary Pumped Loop

Jafar Darabi, Michael M. Ohadi, Sergeui V. Dessiatoun, Majid Molki

Electrode Optimization for an Ehd-Enhanced Capillary Pumped Loop (Technical Report)

Center for Environmental Energy Engineering, Department of Mechanical Engineering, University of Maryland 1999.

(BibTeX)

56.Augmentation of Thin Falling-Film Evaporation on Horizontal Tubes Using an Applied Electric Field

J. Darabi, Michael M. Ohadi, Sergeui V. Dessiatoun

Augmentation of Thin Falling-Film Evaporation on Horizontal Tubes Using an Applied Electric Field (Journal Article)

Journal of Heat Transfer, 122 , pp. 391-398, 1999, ISSN: 0022-1481.

(Abstract | BibTeX)

55.The Local and Average Heat Transfer Coefficient of R-134a in Plate Evaporators

L.W. Da Silva, Yuan Zhao, Majid Molki, Michael M. Ohadi, Sergeui V. Dessiatoun

The Local and Average Heat Transfer Coefficient of R-134a in Plate Evaporators (Technical Report)

Visteion Climate Control 1999.

(BibTeX)

54.Ehd-Assisted Condensation Technology Demonstration Unit

L.W. Da Silva, Majid Molki, Michael M. Ohadi, Sergeui V. Dessiatoun, F. Marchal

Ehd-Assisted Condensation Technology Demonstration Unit (Technical Report)

Center for Environmental Energy Engineering, Department of Mechanical Engineering, University of Maryland 1999.

(BibTeX)

53.Ehd-Assisted Condenser Technology Demonstrator Unit

L.W. Da Silva, Majid Molki, Michael M. Ohadi, Sergeui V. Dessiatoun, F. Marchal

Ehd-Assisted Condenser Technology Demonstrator Unit (Technical Report)

Center for Environmental Energy Engineering, Department of Mechanical Engineering, University of Maryland 1999.

(BibTeX)

52.High-Voltage Power Supplies for Ehd Applications

L.W. Da Silva, Majid Molki, Michael M. Ohadi, Sergeui V. Dessiatoun, F. Marchal

High-Voltage Power Supplies for Ehd Applications (Technical Report)

Center for Environmental Energy Engineering, Department of Mechanical Engineering, University of Maryland 1999.

(BibTeX)

51.Ehd-Assisted External Condensation of R-134a on Smooth Horizontal and Vertical Tubes

Kwok H. Cheung, Michael M. Ohadi, Sergeui V. Dessiatoun

Ehd-Assisted External Condensation of R-134a on Smooth Horizontal and Vertical Tubes (Journal Article)

International Journal of Heat and Mass Transfer, 42 (10), pp. 1747-1755, 1999, ISSN: 0017-9310.

(Abstract | Links | BibTeX)

50.Ehd-Controlled Frost Reduction on a Vertical Flat Plate under Natural Convection

M. Bloshteyn, M. Molki, Michael M. Ohadi

Ehd-Controlled Frost Reduction on a Vertical Flat Plate under Natural Convection (Inproceeding)

ASME International Mechanical Engineering Congress and Exposition, American Society of Mechanical Engineers, Nashville, TN, 1999.

(BibTeX)

49.Control of Frost Accumulation in Refrigeration Equipment Using the Electrohydrodynamic (Ehd) Technique

L.W. Da Silva, Majid Molki, Michael M. Ohadi, Sergeui V. Dessiatoun, F. Marchal

Control of Frost Accumulation in Refrigeration Equipment Using the Electrohydrodynamic (Ehd) Technique (Technical Report)

Center for Environmental Energy Engineering, Department of Mechanical Engineering, University of Maryland (D-8235), 1999.

(Abstract | BibTeX)

1998

48.Compact Heat Exchangers

Riyaz Papar, Michael M. Ohadi

Compact Heat Exchangers (Inproceeding)

R.A, Nelson; K.S, Ball; Z.M, Zhang (Ed.): 1998 ASME International Mechanical Engineering Congress and Exposition, pp. 451-451, American Society of Mechanical Engineers, Heat Transfer Division, Anaheim, CA, 1998, ISBN: 2725673.

(Abstract | Links | BibTeX)

47.Heat Transfer and Pressure Drop Characteristics in an Ehd-Enhanced Finned-Tube Gas-to-Gas Heat Exchanger

Michael M. Ohadi, S. S. Li, A. I. Ansari

Heat Transfer and Pressure Drop Characteristics in an Ehd-Enhanced Finned-Tube Gas-to-Gas Heat Exchanger (Journal Article)

International Journal of Fluid Mechanics Research, 25 (4-6), pp. 656-661, 1998.

(Abstract | Links | BibTeX)

46.Electrohydrodynamic Enhancement of Heat Transfer

Michael M. Ohadi, Sergeui V. Dessiatoun

Electrohydrodynamic Enhancement of Heat Transfer ()

1998, (Assignee: University Of Maryland, Application Num: US 08/673,424, Patent Num: US5769155 A).

(Abstract | BibTeX)

45.Experimental Investigation of Reducing Startup Time on Capillary Pumped Loop with Ehd Assistance

Bingjian Mo, Michael M. Ohadi, Sergeui V. Dessiatoun, Jeong (Jake) H. Kim, Kwok H. Cheung

Experimental Investigation of Reducing Startup Time on Capillary Pumped Loop with Ehd Assistance (Inproceeding)

1998 Space technology and applications international forum, pp. 464-470, AIP Publishing, 1998.

(Abstract | BibTeX)

44.Liquid-Vapor Separation and Thermal Management on Ehd-Enhanced Capillary Pumped Loop

Bingjian Mo, Michael M. Ohadi, Sergeui V. Dessiatoun

Liquid-Vapor Separation and Thermal Management on Ehd-Enhanced Capillary Pumped Loop (Inproceeding)

11th International Heat Transfer Conference, pp. 63-68, CRC Press,