­

Personnel

Faculty and Research Staff

Michael Ohadi

Dr. Michael Ohadi
Director, Professor of Mechanical Engineering, and CEEE Founding Faculty Member

Dr. Ohadi is a CEEE founding faculty member and founder of the Advanced Heat Exchangers and Electronics Cooling Consortium. He is internationally recognized for his research in heat and mass transfer and smart energy systems . He is the inventor/co-inventor of eight issued U.S. patents and has published more than 150 refereed technical publications. Dr. Ohadi has actively participated in promoting the support for fostering technological innovation and entrepreneurship. In 2002, he was featured in Washington Post for his efforts involving innovation and technology transfer. From 2003 to 2010 he was on leave assignment to the Petroleum Institute (Abu Dhabi) where served as Director of Mechanical Engineering (2003-2006) and Provost and Acting President (2006 to 2010). He is a fellow member of both ASME and ASHRAE and has won numerous awards from both societies.
Email: ohadi@umd.eduWebsite

 

Serguei Dessiatoun

Dr. Serguei Dessiatoun
Associate Research Scientist

Dr. Sergeui Dessiatoun is an Associate Research Professor of Mechanical Engineering at the University of Maryland, College Park. He has over thirty years of extensive experience in mechanical engineering design including design and development of thermal and hydraulic loops, aerospace and space cooling systems, environmental control systems, refrigeration and heat transfer systems, heat engines, diesel and gasoline fuel injection systems, and electronic control systems. Dr. Dessiatoun has been intrinsically involved in the ongoing research in the Smart and Small Thermal Systems (S2TS) laboratory at the University of Maryland. Dr. Dessiatoun is the author or co-author of over 30 patents in the area of energy transfer and conversion, including the concept of force-fed heat transfer technology that is the base for this presentation.
Email: ser@umd.edu Website

 

Amir Shooshtari

Dr. Amir Shooshtari
Associate Research Scientist

Amir H. Shooshtari is a Research Scientist in the Small and Smart Thermal Systems at the University of Maryland, College Park. He received his Ph.D. in 2004 in Mechanical Engineering. Since 2005, he has been a member of research faculty at the University of Maryland. His research interests include design and development of advanced thermofluid processes, electronic cooling, two-phase flow and fluid flow in porous media. Dr. Shooshtari is the author or co-author of over 20 publications in international journals and conferences. He is a member of ASHARE and ASME. He is recipient of ASHRAE Grant-in-aid Fellowship (2003–2004) and ASHRAE National Capital Chapter Scholarship Award (2003).
Email: amir@umd.edu | Website

Farah Singer

Dr. Farah Singer
Research Associate

Farah joined S2TS lab on February 2016. She received her PhD in December 2014 in Engineering Sciences from the University of Poitiers in France. She has experience in studying analytically and computationally the Radiative Heat transfer and Near-field Radiative Heat transfer in Dielectrics, Metals and Doped semiconductors. She holds a Master’s degree in Fundamental/Computational Physics from the Lebanese University in Beirut. Her research interests include Heat transfer and its different mechanisms, and thermal management systems.
Email: fsinger@umd.edu|

Dr. Martinus Arie
Research Associate

Dr. Martinus A Arie joined CEEE's research faculty as a post-doctorate researcher in 2016. He is assigned to the Smart and Small Thermal Systems Laboratory (S2TS) and at the Terrapin Works Center of Additive Manufacturing at the University of Maryland. Dr. Arie received his B.S. and Ph.D. degrees in mechanical engineering from UMD. His areas of expertise are heat transfer, fluid dynamics, heat exchangers, numerical modeling, and design optimization. In addition, Dr. Arie is also an expert in additive manufacturing technique such as Fused Deposition Modeling (FDM) and Direct Metal Laser Sintering (DMLS). His project includes development of high performance advance metallic, polymer, and composite heat exchangers using additive manufacturing techniques..
Email: martinus@umd.edu|

Dr. Raphael Mandel
Research Associate

Raphael Mandel joined the S2TS lab as an undergraduate research assistant in winter 2010. After graduating with a B.S. in Mechanical Engineering from the University of Maryland in spring 2010, Raphael elected to stay with the S2TS lab as a graduate research assistant in order to pursue his Ph.D. As a graduate student, Raphael has received numerous awards, including the Dean’s Fellowship, ASHRAE Graduate Grant-In-Aid Award, EMERC Hulka Energy Research Fellowship, and L-3 Graduate Fellowship. In addition, Raphael was accepted into the Future Faculty Program and served as a Future Faculty Fellow, where he mentored graduate students and co-taught a course with a faculty member. In his dissertation research, Raphael developed and modeled a novel cooling concept utilizing Film Evaporation with Enhanced fluid Delivery System (FEEDS), capable of achieving high heat fluxes (>1kW/cm2) and heat densities (>340W/cm3) at high vapor qualities (>45%) and moderate pressure drops. He currently is employed as an Assistant Research Scientist in S2TS, where he serves as technical lead.
Email: rmandel@umd.edu|

Dr. Ratnesh Tiwari
Research Associate

Dr. Ratnesh Tiwari received his Ph.D. in Mechanical Engineering from University of Maryland in 2015. He received his undergraduate degree from Indian Institute of Technology (IIT) Kanpur, India in 2006. Prior to joining the University of Maryland, Dr. Tiwari has worked in the process and oil and gas industry for more than six years in the area of heat exchanger design and process development.He has extensive experience of designing experimental loops related to thermo fluidic systems, microchannel heat exchangers and micro reactor design and building energy modeling. He is currently involved in design and development of low cost microchannel heat exchangers for industrial system. He is also working on techno economic analysis and market analysis of the ongoing research projects.
Email: ratnesht@umd.edu|

Current Ph.D. Students

Stefan Bangerth

Stefan is a Ph.D. candidate with particular interests in process intensification and building energy modeling. His Ph.D. research focuses on utilizing centrifugal forces to enhance the absorption process in absorption chillers. Prior to joining the S2TS laboratory, he spent an assignment abroad at the Petroleum Institute, Abu Dhabi, UAE. He holds a Bachelor’s degree in Chemical Engineering from Mannheim University of Applied Sciences, Germany, and a Diploma degree in Economics from Mannheim University, Germany. For the 2016-17 academic year, Stefan serves as President of the ASHRAE UMD Student Chapter.
Email: sbangert@umd.edu

David Deisenroth

David Deisenroth joined the S2TS lab as a Ph.D. student in mechanical engineering in 2014 after completing his B.S. and M.S. in mechanical engineering at Michigan Technological University. David has worked on polymer heat exchanger projects, including exploration of novel manufacturing methods and thermal enhancements polymers. Currently, he is working on two-phase flow visualization to better characterization of flow dynamics in high heat flux electronics cooling systems.
Email: ddeisenr@umd.edu

Xiang Zhang

Xiang Zhang joined S2TS lab as an undergraduate research assistant as a part of his B.S/ M.S joint program in Spring 2014. He received his Bachelor of Science degree in Mechanical Engineering from University of Maryland (Sep 2011 – May 2014). Xiang was selected as a recipient of an ASHRAE Graduate Student Grant-In-Aid for the 2015- 2016 academic year from a group of highly qualified applicants. Xiang’s current research work is to take advantage of metal additive manufacturing technology to fabricate novel heat/mass exchanger which can be used for power plant or aerospace applications, and to test the heat exchanger prototypes under high temperature conditions.
Email: xzhang27@terpmail.umd.edu

Daniel Bae

Daniel Bae started working as an undergraduate research assistant at the S2TS lab the summer of 2014. He obtained a B.S. in mechanical engineering and physics at the University of Maryland College Park. He participated in the Mechanical Engineering Department’s BS-MS program and elected to pursue his Ph.D in Mechanical Engineering starting Fall 2015. Currently, Daniel actively contributes to the embedded Force-Fed Microgrooved Heat Exchanger (FFMHE) technology research, where he is involved in optimizing the fluid conditions and the geometry of the microgrooved heat exchanger to further improve two-phase cooling systems.
Email: bgp723@terpmail.umd.edu

David Hymas

David Hymas joined the S2TS lab as an Undergraduate Research Assistant and is currently working as a Graduate Research Assistant perusing a PhD in Mechanical Engineering. He is a student member of ASME, ASHRAE and Pi Tau Sigma. His research focuses on the development of Embedded Fiber Composite Additive Manufacturing and Polymer Composite Heat Exchangers with support from Arpa-E’s project ARID. His main research interests focus on the development of Additive Manufacturing Processes and their relation to the field of heat transfer as well as the development of Advanced Mechatronic Systems and UMD’s patent pending Cross-Media Fiber Heat Exchanger.
Email: dhymas@umd.edu

Ramin Moradi

Ramin is a graduate research assistant in S2TS lab. He joined the Smart and Small Thermal Systems Laboratory on september 2016, pursuing his Ph.D in the field of fluid mechanics and heat transfer after getting his BSc in mechanical engineering from Sharif University of Technology located in Tehran, Iran.Currently he is working on design, manufacturing and reliability of a Novel polymer composite heat exchanger for power plant cooling.
Email: raminmrd@terpmail.umd.edu

Hadi Keramati

Hadi Keramati

Hadi Keramati joined S2TS lab as a graduate research assistant in Spring 2017. He received his M.S. in Mechanical Engineering from Sharif University of Technology in Iran and decided to continue with his PhD degree at University of Maryland. He is also a student member of ASHRAE. His research interests include self-assembly, flow visualization, electroosmotic, and heat transfer. His current research involves numerical and experimental assessment to optimize the latest generation heat exchangers, utilizing UMD’s patented manifold-microchannel technology and Additive Manufacturing technique.
Email: hkeramat@umd.edu

Fabio Battaglia

Fabio Battaglia joined S2TS for the first time in 2014 for his master thesis project. After persuading his M.S. in Energy Engineering from Politecnico di Milano in Italy, he joined the lab for a second internship in the Summer 2016. Starting from Spring 2017, he is a graduate research assistant and also an ASHRAE member. His researches at the UMD involved enhanced cooling system for power electronic devices, experimental two-phase flow characterization and energy consumption modelling of building on campus to reduce the energy consumption trough energy conservation measures.
Email: fabio@umd.edu

Graduate Research Assistants

Jason Kelly

Jason obtained his Bachelors in Mechanical Engineering at the University of Maryland, Baltimore County in 2010 and Masters in Engineering Management from the same school in 2015. Before joining CEEE, Jason worked as a Mechanical Engineer for Department of Defense contractor, specializing in mechanical design of Unmanned Air Vehicles and shelter control systems. He is now a master’s student working in the fields of energy auditing and energy management in buildings. His interests include efficient energy usage strategies in buildings, novel heat exchanger systems, and computational methods in heat transfer and fluid mechanics.
Email: jkelly12@umd.edu

Dana Savage

Dana Savage joined the S2TS team in the fall of 2014 in pursuit of a Master of Science degree in mechanical engineering. He received a Bachelor’s of Arts in Mathematics from St. Mary’s College of Maryland in the May of 2012. Since joining the ST2S team, Dana has assisted with multiple projects including investigations of heat exchanger fabrication with additive manufacturing. Currently, Dana’s research focuses on improving energy efficiency at UMD by directing detailed energy audits and modeling of energy-intensive campus buildings.
Email: dmsavage@umd.com

Nail Rachidi

Nail Rachidi joined S2TS lab on June 2016 as a graduate research assistant. After graduating with a B.S. in Mechanical Engineering from Philadelphia University located in Philadelphia, Nail decided to pursue his Professional Master degree in Mechanical Engineering with a focus in Sustainable Energy/ Energy Efficiency from University of Maryland. He is a student member of ASHRAE. Nail’s current project comprises of analyzing energy consumption of commercial and residential UMD campus buildings and implementing energy conservation measures when possible.
Email: nail.rachidi@gmail.com

Adhiraj Singh

Adhiraj joined University of Maryland, College Park to pursue Masters in Chemical Engineering, after completing his Bachelors in Chemical Engineering from India. His work is focused on Energy Modeling and Audit of residential buildings on campus of University of Maryland, College Park. He diagnoses energy and water consumption in select high energy consuming, complex buildings and makes recommendations that will enhance energy savings and reduce carbon footprint significantly.
Email: asingh03@terpmail.umd.edu

Raja Sampath

Raja is currently a Master of Engineering student in Mechanical Engineering at University of Maryland. He has graduated from Indian Institute of Technology Madras with a Dual Degree in Mechanical Engineering, specializing in Energy Technology. Prior to joining the S2TS team in February 2017, Raja has worked with Mercedes Benz R&D India, Bengaluru, in component-level CFD simulations of conjugate heat transfer. He is currently involved in Energy Audit of Data Centers in UMD.
Email: rajam@terpmail.umd.edu

Undergraduate Research Assistants

Xiao Lin

Xiao Lin joined the S2TS lab as an undergraduate research assistant in Spring 2016 while pursuing her B.S. in Mechanical Engineering and Statistics at the University of Maryland. Currently, her research focus is energy audit of high consuming buildings, aiming to improve energy efficiency and benefit the sustainability of the UMD campus. The project involves energy consumption analysis, modeling of HVAC systems, and proposing possible Energy Conservation Measures (ECMs).
Email: xiao365@umd.edu

Alexander Dessiatoun

Alexander Dessiatoun, also known as Sasha, is an undergraduate research assistant for the S2TS lab. He is currently an undergraduate student in the mechanical engineering field. His work focuses on helping graduate students with experimental test setups, research, and design implementation
Email: adessiatoun@gmail.com

Interns

Marvyn Mac

Marvyn Mac joined S2TS lab in 2016 as an intern in order to carry out his final project internship. He is currently a student of EPF Graduate School of engineering in Troyes (France), pursuing his fifth year at the University of Maryland for 6 months.His work consists of collecting and gathering data for energy audit. In addition, he analyzes the energy consumption of a complex building and models it with the software Energy plus.
Email: marvyn.mac@epfedu.fr

Administrative Assistant

Shwetha Choudhary

Shwetha Choudhary is currently pursuing her masters in Telecommunication Engineering at University Of Maryland, College Park. She joined the S2TS team in Fall 2016 and has since then handled the administrative tasks associated with S2TS. She has also contributed to the data analysis and documentation for the Energy Audits. In addition, Shwetha was also responsible for the implementation of the updated website of S2TS.
Email: sschou10@terpmail.umd.edu